3KASMC18AHM3_B/H Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

3KASMC18AHM3_B/H is a TVS - Diodes commonly used in many applications. The TVS - Diodes is a type of diode, which has the ability to protect electronic components from voltage variations and power surges. The 3KASMC18AHM3_B/H is specifically designed to provide DC protection for data lines and systems.

The 3KASMC18AHM3_B/H is a dual-channel silicon-controlled rectifier (SCR) which provides protection for high-frequency signals and data lines from transient voltage surges. It is a unidirectional device, meaning only current allowed in one direction, and capable of operating in temperatures from -55°C to +175°C.

The 3KASMC18AHM3_B/H has two integrated protection threshold levels, one for over-voltage and the other for under-voltage. The overvoltage threshold level is triggered when excessive voltages occur on the line and it prevents it from damages. The undervoltage threshold level is triggered when the voltage on the line drops below the predefined level and it prevents the system from malfunctioning.

The 3KASMC18AHM3_B/H TVS - Diodes features a bidirectional symmetrical clamping structure which provides the highest level of protection against transients. It also features an integrated thermal protector which turns off the device when it reaches a maximum junction temperature which is above the operating range. This thermal protection is important in preventing the device from permanent damage or destruction caused by excessive high temperatures.

The 3KASMC18AHM3_B/H is suitable for applications such as computers and imaging equipment, communications systems, industrial control systems, automotive systems, and consumer electronics. It can also be used in high-frequency power supplies, telecommunications, radar systems, and aerospace applications. It is especially useful in applications where transients may occur due to noise or other interference.

The 3KASMC18AHM3_B/H working principle is based on its ability to absorb transient energy and limit the voltage and current applied to the protected device during a fault. When an over-voltage occurs, it will conduct the current and divert it away from the load, while at the same time providing a low impedance path for the fault current. With the under-voltage condition, the device will provide a low impedance path for load current while blocking the fault current.

In addition, the 3KASMC18AHM3_B/H provides voltage and current limiting against short circuits, which helps to protect sensitive and expensive equipment from damage. It is also designed with a low capacitance which helps reduce the effects of high-speed switch transients and ringing on the line.

The 3KASMC18AHM3_B/H can be used in a variety of devices to help protect from voltage and current surges. It can be used in combination with other transient protection components such as fuses and varistors, and has a wide temperature range which makes it suitable for many different applications.

The specific data is subject to PDF, and the above content is for reference