3RHP1240D24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 3RHP 1240D24 contactor is a solid state device, specially designed for applications where a high switching voltage or current is required. It is a high current contactor capable of switching up to 12 amperes of current, making it suitable for mid range applications. It is an ideal choice for switching loads, providing reliable switching of circuits, as well as preventing overloads and short circuits from thermal damage.

The 3RHP 1240D24 contactor is designed to provide reliable switching of high current loads. It uses a combination of solid state technology and an electro-mechanical contactor element. The contactor element is made from a solid-state insulation material, which allows high voltage and current to be reliably switched without causing any thermal damage. The contactor element is actuated by an electromechanical mechanism, which is designed to reduce the size of the contactor.

The 3RHP 1240D24 contactor has two operating modes. In the first mode, the contactor is activated by an external control circuit, which sends a signal to the contactor to open the contacts. In the second mode, the contactor is operated by an electronic control device, which is programmed to open and close the contacts when required. This type of contactor is often used in industrial applications as it offers a reliable method of switching high currents and voltages, thus providing protection from hazardous overloads.

The working principle of the 3RHP 1240D24 contactor is quite simple. When the external control circuit sends the signal to open the contactor, the contactor uses the electromechanical mechanism to actuate the contactor element. This element then opens the contact, allowing the current to flow into the load. The same mechanism reverses the action when the control circuit sends the signal to close the contactor, thus allowing the current to be switched off.

The 3RHP 1240D24 contactor is used in a wide variety of applications, from motors to lighting systems and AC distributions, as well as in medical instrumentation and telecommunications. This contactor is ideal for use in areas where there is an increased risk of electric shock or a risk of short-circuiting due to high current or voltage. In addition, it is well suited for use in switches and relays due to its low size and weight.

In summary, the 3RHP 1240D24 contactor is a robust and reliable device, ideal for applications where a high switching voltage or current is required. It is designed to provide reliable switching of high current loads and is suitable for a wide range of industrial and commercial applications. It is an ideal choice for electrical components requiring a reliable source of protection from high current or voltage and is available in a range of sizes to suit all applications.

The specific data is subject to PDF, and the above content is for reference