3RHP2440D24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactor (Solid State) is a device that uses electrical and mechanical components to control electrical circuits. It can be used to switch a large amount of current in an industrial setting. The 3RHP2440D24 is one such device. This article will look at the application field and working principle of the 3RHP2440D24.

The 3RHP2440D24 has been designed for use in three different application fields: motor control, circuit protection, and solid state switching. In motor control applications, the contactor is used to switch on and off the electrical power to the motor, allowing it to start, run, and stop, as needed. It is also used in circuit protection, where it will disconnect power in the event of an unsafe situation in order to protect the circuit. Finally, it can be used as a solid state switch, allowing the user to control a large amount of current with a simple switch.

The 3RHP2440D24 is a contactor with an insulated frame and “through hole” contact design. This contactor is designed for use in systems rated up to 690 volts ac, with a maximum rated current of 400A. The contactor has a UL listed tristmold case, designed to break the mechanical connection when no current is applied, helping to protect the system from over-currents and short circuits. The 3RHP2440D24 also has DC control coils, allowing it to be used in both AC and DC applications, and an integrated surge suppressor, helping to protect against voltage transients.

The 3RHP2440D24 works by using an electrical current to actuate a set of electrical contacts. This current causes the contactor to move, allowing power to flow through the connected circuit. The current then causes the voltage to drop, leading to the flow of current in the connected circuit. When the current returning from the connected circuit is higher than the current that actuated the contactor, the contactor will return to its original position, breaking the circuit and preventing further current flow through it.

In summary, the 3RHP2440D24 is a contactor with an insulated frame and “through hole” contact design. It is designed for use in systems rated up to 690 volts ac, and has a maximum rated current of 400A. The contactor works by using an electrical current to actuate a set of contacts, allowing power to flow through the connected circuit. When the current returning from the connected circuit is higher than the current that actuated the contactor, the contactor will return to its original position and break the circuit, preventing further current flow.

The specific data is subject to PDF, and the above content is for reference