4114R-1-123

Number of Pins:	14
Height - Seated (Max):	0.185" (4.69mm)
Size / Dimension:	0.765" L x 0.300" W (19.43mm x 7.62mm)
Supplier Device Package:	14-DIP
Package / Case:	14-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	250mW
Series:	4100R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	7
Tolerance:	±2%
Resistance (Ohms):	12k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 4114R-1-123 resistor is an example of what is known as a resistor network or array. This type of network or array is a circuit board that contains multiple resistors, or devices used to limit the flow of electric current, and allow for current to be divided into multiple paths. It is used for a variety of applications, ranging from signal conditioning and circuit protection to heating and cooling applications.The 4114R-1-123 resistor has four modules, which are connected in a series configuration, and are called the resistance island modules. Each module contains one resistor and four terminals, and these terminals are electrically connected together. The resistance island modules allow the 4114R-1-123 resistor to be operated in a variety of ways, including four independent paths, two paths with opposite polarity, and a single path with half the resistance. This allows for a wide range of varying configurations and custom design solutions, such as power conversion, current measurement, and power switching.The primary function of the 4114R-1-123 resistor is to limit the amount of current that flows through it. This is achieved by the resistance of each module of the network, determined by the ohmic value of the resistor. The total resistance of the network is equal to the sum of the resistances of each resistor in the network, and this resistance is what ultimately limits the amount of current that is allowed to pass. As the current passing through the 4114R-1-123 resistor increases, so does the level of resistance, limiting the amount of current that is allowed to flow.In addition to limiting the amount of current that passes through it, the 4114R-1-123 resistor also acts as a voltage reference, allowing for a lower voltage drop across other network modules. This is due to the parallel nature of the network, and results in a lower overall voltage drop for the entire network. This can be beneficial in applications where a low voltage drop is desired, such as signal conditioning and power switching.The 4114R-1-123 resistor is generally used in applications where multiple resistors need to be connected together, but no direct connection is needed between each resistor. Furthermore, the 4114R-1-123 resistor is a low-power alternative to traditional four-terminal networks, and offers higher reliability and lower power consumption.Overall, the 4114R-1-123 resistor is an important component of many circuit designs, providing both a simple and economical solution for circuit protection and signal conditioning. With the ability to configure multiple resistors in a single network, the 4114R-1-123 resistor offers designers a flexible solution for a wide variety of applications. Furthermore, its low power consumption and high reliability make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description