4700-008MLF Filters

Current:	10A
Height:	0.095" (2.41mm)
Size / Dimension:	0.315" L x 0.090" W (8.00mm x 2.29mm)
Package / Case:	Pill, Square
Mounting Type:	Surface Mount
Voltage - Rated:	100V
Applications:	General Purpose
Operating Temperature:	-55°C ~ 125°C
ESD Protection:	No
Values:	L = 0.1µH, C = 4000pF
Series:	4700
Resistance - Channel (Ohms):	--
Attenuation Value:	52dB @ 100MHz
Center / Cutoff Frequency:	--
Number of Channels:	1
Technology:	LC (Pi)
Filter Order:	3rd
Type:	Low Pass
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks)

Electromagnetic interference (EMI) and radio-frequency interference (RFI) are both forms of electromagnetic radiation that can cause disruptions in equipment and systems. These two types of interference can be drastically reduced or even eliminated by the installation of filters. 4700-008MLF is one such filter that can help reduce or eliminate EMI and RFI in a particular device or system. The 4700-008MLF filter is a surface-mounted device designed to suppress high-frequency signals and interference from entering a device or system. It is typically used in audio equipment, sensors, and automotive applications where noise must be reduced. The filter consists of two separate filters, an upper filter and a lower filter. The upper filter is a low-pass filter that blocks high-frequency signals and creates a noise barrier. The lower filter is a high-pass filter that filters out low frequencies that may be present.The 4700-008MLF filter uses inductive and capacitive components to create an LC (low-pass/high-pass) network. Inductors are commonly referred to as coils, as they are essentially coiled copper wire that create an electromagnetic field when a current is applied. Capacitors are used to store electrical energy, and they can be thought of as an electrical tank. When used in combination in an LC network, the inductors and capacitors reduce interference from entering the device or system. The inductors work by blocking signals with frequencies above the cutoff frequency of the LC network. The cutoff frequency is a frequency point where the inductors and capacitors stop blocking and attenuating the signal, and the signal passes unimpeded. The capacitors on the other hand, allow signals with frequencies lower than the cutoff frequency to pass unimpeded. The inductors and capacitors are interconnected in such a way that a filter is created that blocks both high-frequency and low-frequency signals. This allows the filter to reduce or eliminate EMI and RFI interference.The 4700-008MLF filter is an effective way to reduce or eliminate EMI and RFI interference in a certain device or system. By employing an LC (low-pass/high-pass) network, the filter can efficiently block and attenuate both high-frequency and low-frequency signals, protecting electronic components from interference. This makes the 4700-008MLF filter a great choice for audio equipment, sensors, and other applications where noise levels must be reduced.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description