Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 4820P-T01-333LF is a type of resistor network or array. A resistor network or array is a combined circuit which consists of several resistors connected together in a particular pattern. These networks or arrays allow for unbalanced loads and can be used to regulate electrical currents that flow in circuits. It can also be used as a voltage divider.

This particular network is made up of eight resistors which are all the same size and shape and connected in a series arrangement. The resistors have a resistance of 333 ohms each, and the total resistance of the network is 2664 ohms. The total current of the network is 8 amps, and the voltage across each resistor is 333 volts.

The purpose of the 4820P-T01-333LF resistor network is to reduce the overall power dissipation of a circuit by allowing the power to be evenly distributed across all of the resistors in the network. For example, if you had a circuit with a single resistor of 333 ohms, then the voltage across it would be 8 amps times 333 ohms, or 2664 volts. By using the 4820P-T01-333LF resistor network, the voltage is distributed evenly across all of the resistors, which reduces the power dissipation and allows for a more efficient circuit.

The 4820P-T01-333LF is often used in power supplies, instrumentation, audio, and automotive applications. In automotive applications, the network is typically used in the system for controlling the fuel injection pulses. Other applications include controlling the speed of electric motors, regulating the brightness of LEDs, and buffering analog signals to reduce noise.

The working principle of the 4820P-T01-333LF is based on Ohm’s law. Ohm’s law states that the current flowing through a circuit is proportional to the voltage applied across the circuit. By connecting resistors in series, the voltage is divided evenly across each resistor in the network and the current is balanced. This allows for a more efficient and regulation of the current in the circuit.

In conclusion, the 4820P-T01-333LF resistor network is a type of resistor array that is commonly used in circuit designs where power dissipation needs to be reduced and electrical currents need to be regulated. The array has eight resistors with 333 ohms each and can be used in numerous applications such as automotive, instrumentation, and audio. The working principle is based on Ohm’s law and utilizes the fact that the voltage is divided evenly across each resistor in the array when connected in series.

The specific data is subject to PDF, and the above content is for reference