49FCT805BTSOG8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 49FCT805BTSOG8 is a clock buffer and driver device specifically designed to support the high frequency requirements and tight timing budgets of today’s computer system designs. Clock buffers act as amplifiers and are used to distribute high-speed clock signals to multiple logic outputs without introducing signal degradation. They provide adequate driver capability and receive logic-level inputs from tandem clock drivers.

The 49FCT805BTSOG8 is a dual clock buffer with a maximum propagation delay of 5ns. Its output impedance is about 50 ohms, and its typical fanout is 11. It is a very low voltage device, operating on between 1.65 and 3.6 volts. It has a low power consumption of typically 5mA, and is protected against reverse polarity and overvoltage.

The 49FCT805BTSOG8 is typically used in clock buffering applications where a single, high-speed clock signal needs to be distributed to multiple outputs. It is also often used to drive multiple clock inputs, such as in processor clock distribution applications. The device can also be used to implement multiple-phase clock generation and serial data transfers.

The 49FCT805BTSOG8 is a high-speed, high-performance clock buffer that is capable of very tight signal integrity. It requires relatively low operating voltage, and has very low propagation delay. It is a very reliable and robust device and is able to meet the tight timing requirements of today\'s computer system designs. It is a good choice for clock buffering and other timing applications.

The 49FCT805BTSOK8 is a fully asynchronous device, which means it does not require any external clock source. This makes it ideal for applications where the clock may change frequency. It operates on a positive differential logic with a logic high level of 1.65 to 3.6 V, and a logic low level of 0.2V to Vdd-0.2V. This ensures that the signal is not affected by noise or other EMI (Electro Magnetic Interference) sources.

The 49FCT805BTSOG8 also has two differential outputs, which are used to drive multiple logic outputs. These outputs are able to support high frequency clock signals up to 35MHz, and can be used to drive logic outputs with very low propagation delay. The device also has an internal skew compensation of 500ps, which eliminates any timing discrepancies between the different clock outputs.

The 49FCT805BTSOG8 is a robust device, with a very slow output rise time of just 250ps, and a very fast output fall time of 25ps. This makes it an ideal device for use in critical clock buffering applications. It also has an operating temperature of -40°C to +85°C, which makes it suitable for use in industrial applications.

The 49FCT805BTSOG8 is a versatile device that can be used in a variety of clock buffering and timing applications. Its high-speed performance and low power consumption make it an ideal choice for computer system designs where timing requirements are tight. Its ability to drive multiple logic outputs with very low propagation delay makes it a great choice for processor clock distribution applications, and its low voltage operation makes it a good choice for EMI-sensitive applications.

The specific data is subject to PDF, and the above content is for reference