49FCT806ASOG8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 49FCT806ASOG8 is a clock buffer and driver, designed for clock and timing applications. The device consists of eight dedicated buffers controlled by a single enable input, SEL0. The outputs are designed to drive 15 high speed loads with up to 10MHz of output performance. The device is designed to provide maximum flexibility in making clock or timing synchronized signals for synchronous memory and/or high-speed logic applications.

The 49FCT806ASOG8 has two main components. The main component is a series of internal registers and clocks that create the buffered synchronous clock outputs. The internal registers are programmable and can be used to synchronize the outputs to any combination of rising and falling edges of the two clock inputs. This allows the device to be used with different frequencies and provide flexibility in its use.

The secondary component of the 49FCT806ASOG8 is the internal amplifier circuit. This circuit amplifies the clock signal, allowing it to be used to drive higher load capacitive loads such as memory devices. It also ensures that the outputs are aligned correctly for maximum signal integrity.

The device uses an advanced architecture to ensure the outputs always remain synchronized. It also has built-in power-up circuitry to ensure that all outputs maintain the correct state when power is applied. It also has a low power standby mode that allows it to reduce its operating power while still providing the required level of synchronization.

The 49FCT806ASOG8 application field and working principle is best suited for applications requiring synchronous clock signals. Examples include driving synchronous memory, FIFO memory, LCD controller, and frequency synthesizers. Additionally, the device may be used in systems where the clock synchronization needs to be easily changed or fine tuned. Its flexible output capabilities make it suitable for a wide array of devices and systems.

The 49FCT806ASOG8 is available in both surface mount and through hole versions. It is designed to operate from both 3V and 5V power supplies. The device also has a wide range of temperature ranges making it suitable for industrial environments.

The 49FCT806ASOG8 is a versatile and reliable clock buffer and driver for any application requiring high-speed clock synchronization. Its flexible programming, wide range of power supply options, and excellent thermal performance make it ideal for a wide range of systems. It is available in both surface mount and through hole versions, making it easy to implement into any system.

The specific data is subject to PDF, and the above content is for reference