4N25-300E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, are devices that contain two separate electrical circuits, one of which is light coupled. The 4N25-300E optoisolator belongs to the family of devices referred to as "transistor, photovoltaic output" optoisolators. It enables electrical isolation of two separate circuits, preventing external voltage from passing between them.

The 4N25-300E specifically contains a light emitting diode, or LED, which emits light with a wavelength of 660nm (red light). This light is converted into electricity by a photovoltaic cell, which is connected to a 6-pin dual-in-line package. For each functioning output, within the package there are three pins: an input tab, a ground tab, and an output tab (collector). These pins enable the output circuit to function, enabling isolation from the input side.

The 4N25-300E optoisolator is a versatile device, and can function in a variety of application fields. One of the most common uses is in an Operating Amperage Limiting system, where it functions as an isolator between an electrical current and a shunt resistor. This operational field mainly requires isolation of signals entering the circuit, where the 4N25-300E is placed before the resistor. In this device, the LED is used to conduct current from the input side, and the photovoltaic cell converts it into electricity. This electrical signal is then used to activate a circuit, all while maintaining isolation between the two sides.

The 4N25-300E can also be used to control motor speed; specifically, it can enable remote control of the motor. Additionally, the 4N25-300E can be used as an analog signal isolator; it is added in a circuit before an ADC (analog-to-digital converter), in order to block external electrical voltage from affecting the signal.

Other applications of the 4N25-300E optoisolator include Digital Amplifier Input Isolators, Speed Control of AC Induction Motors and Lighting Control Systems. The device can also be used to isolate air flow sensors from power switches.

To sum up, the 4N25-300E is a versatile device, and can be used in a variety of different application fields. It is a useful tool for isolating signals, as well as blocking external electrical voltage from affecting the signal. It contains both a light emitting diode and a photovoltaic cell, which converts light from the LED into electricity.

The specific data is subject to PDF, and the above content is for reference