4N25-X000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components used to provide electrical isolation between two circuits. They typically consist of a light-emitting diode (LED) and a photovoltaic device such as a photodiode or a photocoupler. One circuit, often referred to as the input side, is optically isolated from the other side. The 4N25-X000 series of optoisolators are transistor, photovoltaic output, meaning that they feature a photodiode as their input side and a NPN transistor as their output side. This type of optoisolator is mainly used in applications where a digital signal must be isolated from both low and high voltage circuits.

The 4N25-X000 optoisolator consists of a pair of gallium arsenide infrared emitting diodes driven in opposite directions. When the input side is activated, either one of two functions will be performed: either a digital signal will be generated or current will be regulated. The digital signal is generated when both the infrared diodes are activated at the same time. On the other hand, current can be regulated by controlling the amount of current that flows through the optoisolator. The output side of the optoisolator consists of a NPN transistor which is used to control the direction and amount of current that flows from the input side to the output side.

The 4N25-X000 optoisolator is ideal for use in applications requiring optical isolation of low and high voltage circuits, such as digital logic systems, lighting systems,Test Equipment, and industrial control systems. In these applications, the optoisolator can be used to provide a physical barrier between the two circuits, thus allowing them to interact while also protecting them from each other.

The optoisolator works by detecting the movement of light from one circuit to the other. When the infrared diodes are activated, the emitted light is detected by the photodiode, which then converts the light into a corresponding electronic signal. The electronic signal is then passed through the NPN transistor to the output side of the optoisolator. From here, current is regulated or a digital signal is generated, depending on the type of application.

In summary, the 4N25-X000 optoisolator is a transistor, photovoltaic output type of optoisolator which is used in many applications requiring the isolation of low and high voltage circuits. The optoisolator works by detecting the movement of light between two circuits and converting it into an electric signal which is then regulated or converted into a digital signal depending on the application.

The specific data is subject to PDF, and the above content is for reference