4N29W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic devices which allow for an electrical signal to be transmitted between circuits, while isolating them from each other electrically. They are useful in permitting signals from one circuit to trigger another, without passing any current from one to the other. The 4N29W is one type of optoisolator, with transistor, photovoltaic output.

The 4N29W optoisolator has a a light-detecting diode, which is externally illuminated by an LED, encased in a photo coupler with a phototransistor output. It allows for electrical isolation of an input signal and its output. In the 4N29W, a phototransistor is used as the output. When the LED of the optoisolator is triggered, the phototransistor will switch on or off, depending on how the optoisolator is wired.

The 4N29W optoisolator is popularly used in numerous applications, such as controlling power devices, motor drive circuits, digital logic circuits, and other types of applications where a higher voltage is required. It is also often used in automation control, especially in applications where light isolation is required. It can provide electrical protection and improves system reliability by reducing noise from high-intensity current.

The 4N29W optoisolator is mostly used in industrial systems and Process Control applications. It can be used to convert small currents and voltages from one circuit to another isolated one. Its isolation also prevents dangerous currents from crossing between the two circuits, thus increasing safety in these applications.

The 4N29W optoisolator works on a very simple principle – a light-emitting diode (LED) transmits a light signal through the optoisolator, which is then detected and switched on or off by a phototransistor. When the LED is switched on, it emits a light signal, which is detected by the phototransistor and causes it to switch off or on, depending on the connection. This process is repeated each time the LED is triggered and creates a smooth, secure signal between the two circuits.

The 4N29W optoisolator is a simple yet effective way of isolation circuits from each other, while providing a secure signal. Its ability to convert small currents and voltages from one circuit to another without electrical contact makes it a very safe and reliable device. Furthermore, it is easy to use and to install, making it ideal for a variety of industrial and process control applications.

The specific data is subject to PDF, and the above content is for reference