5.0SMCJ13CATR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

5.0SMCJ13CATR TVS – Diodes Application Field and Working Principle

5.0SMCJ13CATR Transient Voltage Suppression (TVS) – Diodes are devices primarily used for protecting electrical and electronic circuits against ESD (electrostatic discharge) and other voltage transients. These diodes short-circuit any voltage surge, thereby preventing any damage to the circuit or component.

TVS diodes are available in surface mount packages and are usually connected across the power or signal lines of the circuitry. This helps to protect the circuit by absorbing the voltage transient. TVS is used in a wide range of consumer electronic products, from mobile phones to navigation systems, tablets, projectors, electronic toys, etc. These devices can also be used in industrial applications such as automotive electronics, medical imaging devices and industrial instruments.

The 5.0SMCJ13CATR is a part from Littelfuse, and it is an unidirectional TVS (Transient Voltage Suppression) diode. It has an optimized ESD (Electronic Static Discharge) protection with an enhanced discharge current capability. It is used mainly to protect sensitive electronic circuits against ESD and various other transient voltage stresses that might occur in harsh environments. The diode is designed to be used in both 12V and 5V systems, and the total clamp voltage should not exceed 5.95V for 12V systems and 2.95V for 5V systems, respectively.

The 5.0SMCJ13CATR is a small, low power device, with a maximum power dissipation of 0.5W. It also features a low capacitance of maximum 30pF (picofarads), and a wide operating temperature range from -55°C to +125°C. It is also available in different packages from SOT-323 to SMA packages. The breakout voltage of the device is 7.0V and the maximum surge current is 75A.

The working principle of a TVS diode relies on the p-n junction characteristic of a diode. When a voltage transient higher than the breakdown voltage is applied to the circuit, the diode starts to conduct, providing a low impedance path for the surge current away from the sensitive circuit to the ground. This helps to limit the voltage rise across the diode and prevents any damage to the circuit elements. The surge current is then dissipated as heat by the diode, which can cause the temperature to rise. To prevent this from happening, the diode must be mounted with sufficient heat dissipation.

In conclusion, the 5.0SMCJ13CATR is a unidirectional TVS – Diode from Littelfuse that is extensively used for protecting electrical and electronic circuits against ESD (electrostatic discharge) and other voltage transients. The working principle is based on the p-n junction characteristic of the diode, and it has a wide range of applications from consumer electronics to industrial instruments.

The specific data is subject to PDF, and the above content is for reference