5.0SMLJ20CA-TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) diodes are voltage-sensitive devices that can provide surge protection for a wide variety of electronic components. They provide protection from electrical surges and over-voltages by clamping the voltage at a predetermined level and then diverting the current away from the protected components. The 5.0SMLJ20CA-TP is a TVS diode designed for automotive applications. It can be used to protect audio systems, navigation systems, and other sensitive electronics from over-voltage transients such as lightning strikes.

The 5.0SMLJ20CA-TP is a high-speed transient voltage suppressor diode. It has a reverse standoff voltage of 5.0V, meaning it can protect against transients up to 5.0V in voltage. It has a peak pulse power rating of 400W. It has a peak pulse current rating of 4.0A and a clamping voltage of 7.5V. The reverse leakage current is rated at 1.0µA maximum at an operating temperature range of -55C to 125C. The diode is also RoHS compliant, which ensures it is environmentally friendly.

The 5.0SMLJ20CA-TP is a two-terminal, three-pin device that is ideally suited for automotive transient voltage suppressor applications. It is a high-performance diode that can be used in automotive and consumer electronics to protect from electrostatic discharge (ESD) and transient overvoltages. The three-pin configuration allows the diode to be used in a single-wire circuit, which provides more flexibility in the circuit design. The device can also be used in a three-wire-circuit for higher operating current. The diode has a low capacitance and fast response time which enable it to protect against fast transients, high voltage transients, and ESD.

The 5.0SMLJ20CA-TP is designed to start clamping an over-voltage transient when the voltage rises above its reverse standoff voltage, which in this case is 5.0V. The device will then start to dissipate the excess energy and limit the surge to a safe level. The device will then continue to dissipate energy until it has dissipated the entire surge. After the transient has been absorbed, the diode will reset itself and will be ready to protect against the next surge. The device is designed to provide protection even after multiple transients.

The 5.0SMLJ20CA-TP is applicable in a variety of automotive and consumer electronics applications. It is used in automotive audio systems, navigation systems, and other sensitive electronics to provide surge protection from lightning strikes. It is also used in consumer electronics to provide ESD protection and to protect from transients in inductive, logic, and low- dropout regulator circuits. The high-speed response time and low capacitance make the 5.0SMLJ20CA-TP an ideal choice for these applications.

In conclusion, the 5.0SMLJ20CA-TP is a high-performance TVS diode with a reverse standoff voltage of 5.0V and a peak pulse power rating of 400W. It is suitable for use in automotive and consumer electronics to protect against transients, over-voltage transients, ESD, and inductive switching. The three-pin configuration allows for a single-wire or three-wire circuit, and its low capacitance and fast response time make it an ideal choice for these applications.

The specific data is subject to PDF, and the above content is for reference