5 INCH-G-4V

Series:	ADCA
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	0.18 PSI (1.25 kPa)
Output Type:	Analog Voltage
Output:	0.25 V ~ 4.25 V
Accuracy:	±0.25%
Voltage - Supply:	4.5 V ~ 5.5 V
Port Size:	Male - 0.19" (4.8mm) Tube
Port Style:	Barbless
Features:	Amplified Output, Temperature Compensated
Termination Style:	PCB
Maximum Pressure:	7.23 PSI (49.83 kPa)
Operating Temperature:	-25°C ~ 85°C
Package / Case:	4-SIP Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Pressure sensors, transducers, and other related devices are integral to a wide variety of industrial and consumer-level tasks, and the 5 INCH-G-4V is a particularly prominent example in this category. This device is designed to accurately and reliably detect and measure pressure levels in a wide array of systems, from pumps, compressors and valves, to fluid bed driers and other sophisticated contraptions.

Advantages of 5 INCH-G-4V

The 5 INCH-G-4V pressure sensor is a reliable tool with a number of distinct advantages:

• High Accuracy - The 5 INCH-G-4V is designed to be highly accurate, with a range of ±1.5% to ±3.5%. This means that the readings will be precise and consistent, no matter how extreme the pressures.
• High Durability - The 5 INCH-G-4V is built from durable materials, providing a long-lasting solution for industrial and laboratory use. It is capable of withstanding temperatures up to 150°C and pressures up to 50 bar without any disruption.
• Versatility - The device can be used in a variety of applications ranging from high-pressure pumps to water and oil filtering systems. Additionally, the sensor is also compatible with general-purpose signal cables such as 4-20 mA, RS232/485, and Modbus.
• Compact Design - The 5 INCH-G-4V is a small and lightweight device that can be easily integrated into many systems without taking up much space or adding too much weight to the system.

Application Fields and Working Principle

The 5 INCH-G-4V pressure sensor is primarily used in industrial and laboratory settings, though it can also be employed in many other applications. It is capable of detecting and measuring differential and absolute pressures, with both gauge and absolute ranges. Typical applications include tank level monitoring, flow measurement, and safety valve settings, among many others.The working principle of the 5 INCH-G-4V is relatively straightforward. It uses a pi-type piezoresistive measuring cell along with a Wheatstone bridge structure in order to detect and measure the pressure applied to the device. When a pressure is applied to the measuring cell, a resistor in the Wheatstone bridge structure changes and the change in resistance is converted into a corresponding electrical signal. This signal is then sent to the output block where it is digitized and sent to the conditioning amplification block. The amplified signal is then sent to the output pins where it can be measured and analyzed.

Installation and Maintenance

Installing and maintaining the 5 INCH-G-4V is relatively straightforward. The device typically comes in a pre-constructed housing, and requires minimal effort to set up. The user simply needs to attach the input cable, connect the power supply, and adjust the output range as necessary. The device should then be calibrated, and any necessary adjustments can be made to the wiring and calibration of the device.Once installed, the 5 INCH-G-4V requires minimal maintenance. It should be regularly tested for accuracy, and the process should be repeated every few months. Additionally, the device should be cleaned periodically to ensure that the measuring cell remains free of debris and dust particles. Additionally, the device should be checked for signs of physical damage, as even minor dents or scratches can prevent it from functioning properly.

Conclusion

Overall, the 5 INCH-G-4V is an efficient and reliable pressure sensor and transducer that can easily and accurately detect and measure pressure levels. It is suitable for a variety of applications in both industrial and laboratory settings, and features a number of advantages such as high accuracy, durability, versatility, and a compact design. Furthermore, the device is relatively easy to install and maintain, making it an ideal choice for many different types of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description