501BAA16M0000DAFR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators, or oscillator circuits, are electronic circuits which generate a periodic, oscillating signal, often a sine wave or a square wave. An oscillator circuit is constructed with one or more components, such as resistors, capacitors, inductors, transistors, diodes, or waveform generators. These components must be arranged together in such a way that a continuous flow of electrical energy is maintained between them.

The 501BAA16M0000DAFR oscillator is a voltage controlled oscillator designed to provide precise, stable frequency output up to 2.2 GHz. It features very low jitter and excellent phase noise performance. The oscillator is based on a very low noise, low resistance series element and uses a high linearity, low phase noise, low RMS jitter voltage controlled crystal oscillator (VCO) to provide an excellent frequency output.

The 501BAA16M0000DAFR oscillator has a wide variety of applications. It can be used to generate high frequency signals for a variety of test and measurement applications, such as wireless communication devices, RF and microwave equipment, satellite communication systems, and other such applications. It is also suitable for use in consumer electronic products. Its wide frequency range enables it to be used in telecom industry, broadcast industry, and consumer electronics industry.

The working principle of the 501BAA16M0000DAFR oscillator is fairly simple. This oscillator uses a voltage controlled oscillator (VCO) for its frequency stabilization. The VCO is a circuit which generates an output frequency that is proportional to the input voltage. The input voltage is usually supplied by an external voltage source. The VCO is usually composed of two parts; an oscillator and an amplifier. The oscillator produces a high frequency sine wave from a tuned tank circuit, while the amplifier is used to amplify the voltage applied to the tank circuit. The voltage control signal applied to the VCO directly affects the frequency of the output signal, allowing for precise frequency control.

In addition to the voltage control input, the 501BAA16M0000DAFR oscillator also features a “pulse” input, which is used for synchronization of the oscillator. This pulse input can be used to synchronize multiple oscillators in a system. The synchronization signal is typically a sinusoidal wave, and is used to ensure that all oscillators in the system are operating at the same frequency and phase.

The 501BAA16M0000DAFR oscillator is an ideal choice for applications requiring precise frequency control with low jitter and noise. Its wide range of applications and its capacity to synchronize multiple oscillators make it a very versatile device.

The specific data is subject to PDF, and the above content is for reference