515D108M100FV6AE3

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.575" (40.00mm)
Size / Dimension:	0.709" Dia (18.00mm)
Lead Spacing:	0.295" (7.50mm)
Ripple Current @ High Frequency:	1.944A @ 10kHz
Ripple Current @ Low Frequency:	1.69A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	515D
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	100V
Tolerance:	±20%
Capacitance:	1000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are one of the most common types of capacitor used in electrical and electronic circuit applications. They are constructed with two aluminum plates that are isolated from each other by a thin dielectric film. A 515D108M100FV6AE3 is an aluminum electrolytic capacitor with a capacitance of 100 μF, a maximum voltage rating of 6 VDC, and a maximum temperature rating of 105°C.

Application Field

Aluminum electrolytic capacitors are suitable for a variety of applications, including bypass capacitors, filtering, decoupling, and power supplies. When used as a decoupling capacitor, this type of capacitor can supply energy to the load in the form of an electric charge that is stored it in its dielectric material. This stored energy is then released when the current demand of the load exceeds the supply from the power supply. This type of capacitor is also used in the smoothing of power supplies to reduce the amount of voltage ripple. Additionally, they are suitable for DC/DC converters, where they help filter switching noise and can be used as a space capacitance in power filters, as well as energy recovery and resetting.

Working Principle

Aluminum electrolytic capacitors work by electrically charging two thin aluminum plates or foils, which are isolated from each other by a thin dielectric film. It is this film that provides the capacitance. When the applied voltage is greater than the film\'s dielectric strength, a large electric field will be built up between the two plates, causing a charge to be stored in proportion to the applied voltage. This, in turn, creates an electric field between the two plates and this electric field is proportional to the charge stored. When an external current is applied, the electric field will be reduced, resulting in the charge stored in the capacitor being released. Thus, when current is applied a certain amount of charge is stored in the capacitor, and when the applied voltage is removed, the charge stored in the capacitor is also released. Because the aluminum electrolytic capacitor uses an electrolyte to cover the aluminum plates, it can be used in more extreme conditions than other types of capacitors. The electrolyte prolongs the life of the capacitor by providing a source of ions that can neutralize the electrolytic action caused by the atmosphere. The electrolyte also acts as a lubricant, which helps to protect the delicate aluminum plates and dielectric material.

Conclusion

In conclusion, the 515D108M100FV6AE3 aluminum electrolytic capacitor is an effective and reliable solution to a variety of electrical and electronic circuit applications. It is highly suitable for use in bypass capacitors, filtering, decoupling, and power supplies, and can also be used in the smoothing of power supplies, DC/DC converters, and as a space capacitance in energy recovery and resetting applications. Its use is enabled by the combination of aluminum plates and the electrolyte, which not only provides protection and prolongs the life of the capacitor, but also allows for more extreme conditions than other types of capacitors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description