515D337M063DG6AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors, generically referred to as electrolytic, are a type of capacitor with a non-solid dielectric, i.e. an electrolyte containing ions which are able to move freely between two oppositely charged electrodes. The 515D337M063DG6AE3 is often used in applications where high capacitance and long operational life are desired.

These capacitors feature very long life and high ripple current applications. They are constructed from aluminum foil and impregnated paper, and typically use the Aluminum/Aluminum Capacitor as the most common form, the Aluminum/Mica Capacitor is another common type. The 515D337M063DG6AE3 is an Aluminum Electrolytic Capacitor, boasting high capacitance and a rated operational voltage of 63 volts DC.

Aluminum electrolytic capacitors offer high capacitance but they have some limitations. They are relatively large, have limited temperature range, and the electrolyte can dry out over time resulting in leakage current or even complete failure. Depending on the application, some scrap value can remain. Low-ESR aluminum electrolytic capacitors are used where very small capacitors with low ESR is desired.

The 515D337M063DG6AE3 features a standardized 350v capacitor with a capacitance value of 33uF. It allows for a sustained ripple current of 10mA. This makes it suitable for circuits that require high capacitance and long operational life. It is often used in such applications as voltage regulators, battery charging circuits, and peak current loads such as transformers, lamps and motors.

The working principle of an aluminum electrolytic capacitor is based on the electrical capacitance of an electrolytic solution, which is achieved by the formation of a thin insulating film on the aluminum surface by a chemical reaction with the electrolyte. The film acts as an insulating barrier between the aluminum foil and the electrolyte, allowing electrons to pass freely while the electrolyte prevents ions from moving from one side of the film to the other. This arrangement creates an electrical field between the two conductors which holds the electrical charge. As the voltage applied to the capacitor increases, the dielectric strength of the film increases resulting in a decrease in the capacitance as the voltage increases.

The 515D337M063DG6AE3 aluminum electrolytic capacitor is an excellent choice for applications where long life, high capacitance and excellent ripple current are desired. It is specified for a sustained ripple current of 10mA and is rated at 63 volts DC. With its rated operational temperature between -40ºC to +85ºC, the 515D337M063DG6AE3 is a reliable capacitor for a wide variety of applications. It features an industry standard termination and is designed to provide reliable performance for many years with minimal maintenance and periodic inspection.

The specific data is subject to PDF, and the above content is for reference