520M15HA16M3690

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators refer to a type of electronic device that converts a DC voltage into an AC voltage that is stable and regularly oscillates, and can be used to test, drive and generate signals accordingly. 520M15HA16M3690 is one particular oscillator model developed for use in various applications that require a stable voltage output for communication equipment. This article will provide an overview of the 520M15HA16M3690 and its applications, as well as the details of its working principles.

520M15HA16M3690 Overview

The 520M15HA16M3690 oscillator is built with linear circuitry, making it suitable for use in many specialized applications requiring a low-jitter or low-phase noise output. The oscillator operates with a wide DC supply voltage range of 2.4V – 5.5V, typically making it suitable for use in multiple applications. The device also has a package size of 5mm x 3.2mm, making it small and versatile enough for use in various applications.

520M15HA16M3690 Applications

The 520M15HA16M3690 is well-suited for use in many communication applications, including GSM, CDMA, or WCDMA mobile phone receivers, GPS systems when a low noise and low phase noise are required, WLAN designs for both minimal jitter requirements, as well as for providing a wide-range signal-to-noise ratio.It is also suitablefor use in general-purpose RF systems such as network nodes, routers, or cell phones. Other applications include signalgenerators, digital television distribution systems, and high-speed expansion card designs.

520M15HA16M3690 Working Principle

The 520M15HA16M3690 oscillator is designed to produce an output voltage having both a fixed frequency and amplitude. It consists of a small, low-power feedback oscillator circuit, which is composed of an inductor, a capacitor, and an amplifier. The oscillator circuit is designed to oscillate at a certain frequency determined by the inductor-capacitor (LC) tuned circuit. The output voltage is then buffered and amplified by the amplifier to produce a stable, high-amplitude voltage signal.

The LC tuned circuit of the 520M15HA16M3690 oscillator is adjusted to produce a desired frequency by selecting the components, typically a resistor and a capacitor, and varying their values until the desired frequency is achieved. The inductor in the circuit is a linear coil used to provide the steady oscillating current necessary for the oscillator to function. The capacitor is also a linear component used to store energy and provide damping for the oscillating current.

The amplifier in the 520M15HA16M3690 oscillator is typically a differential amplifier, which increases the gain of the signal without introducing distortion. Differential amplifiers also allow for large signal voltage swings, increasing the amplitudes of the voltage oscillations to levels suitable for many applications.

The 520M15HA16M3690 oscillator is designed with fixed components, making its output relatively immune to external electrical noise and interference. This makes it suitable for many sensitive applications such as cellphone receivers, GPS systems, and television distribution systems.

Conclusion:

The 520M15HA16M3690 oscillator is a small, linear oscillator device suitable for use in many applications that require a stable output voltage for communication purposes. This device is designed with a small package size, a wide operating voltage range, and is designed with fixed components, allowing for noise and interference immunity suitable in many sensitive applications. The device works by oscillating an inductor-capacitor tuned circuit, the oscillations being amplified by a differential amplifier and adjusted to specific frequencies.

The specific data is subject to PDF, and the above content is for reference