520M20HT20M0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuit components used to generate a continuous signal of specific frequency and amplitude. The 520M20HT20M0000 is one such type of oscillator used in a wide range of applications. This oscillator, also known as the Motorola MC68HC11 oscillator, is a CMOS oscillator with a frequency range of 3.5MHz to 20MHz.

Application Field

The 520M20HT20M0000 oscillator is widely used in embedded systems, such as those found in robotics, navigation systems, and consumer electronics. It is also used in audio and video applications, where it is used to generate the necessary clock signals for timing, synchronization, and media encoding. The oscillator is also used in automotive control systems, medical imaging devices, and other industrial applications.

Working Principle

The 520M20HT20M0000 oscillator is based on a CMOS ring oscillator topology. It requires a voltage source to activate the circuit. In general, the oscillator has two electrodes, one for the voltage supply, and another for the output. The signal is generated by the internal capacitors, resistors, and two transistors. These components interact to produce the electrical oscillation which creates the frequency of the output signal.

The oscillator operates in two cycles, where the capacitors charge and discharge, alternately. As the voltage across the two capacitors increases, the output of the oscillator changes from low to high. At a certain threshold, the output switches from high to low, and the cycle starts again. This process is repeated to create the square wave output required by many electronic applications.

The 520M20HT20M0000 oscillator allows for precise control over the frequency and amplitude of the output signal. This is made possible by adjusting the resistance and capacitance values within the circuit. Different capacitance and resistance values result in different frequencies and amplitudes. This allows the oscillator to be tuned to the required application.

Conclusion

The 520M20HT20M0000 oscillator is a CMOS oscillator that is used in a wide range of applications. Its easy to adjust frequency and amplitude means that it is suitable for a variety of control systems and audio/video applications. With its small size, high performance, and long-term stability, it is an ideal choice for many different embedded applications.

The specific data is subject to PDF, and the above content is for reference