520M25HT40M0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate a repeating, periodic waveform, typically used in communication circuits to provide signals periodically to keep the system in synchronization. Among these oscillators, the 520M25HT40M0000 is widely renowned for its reliability and performances in many applications. Specifically, 520M25HT40M0000 oscillator is tailored for short-haul and mid-speed serial communications such as Ethernet, WifFi, and USB. Its nominal output frequency range spans from 25 to 40 MHz and can work a temperature range from -40 to 85 degrees Celsius. In addition, the device offers higher frequency stability, wider range of load capacitance and voltage operation of 2.3 to 3.6V, built-in frequency adjustment elements to provide smooth frequency adjustability. Hence, making onboard tuning possible for different RF references tailored from design to production stages.The technology of the 520M25HT40M0000 is based on XTAL (XTAL Referred to as Crystal) oscillator. This type of oscillator, compared to other such as LC (or inductor-capacitor circuit), RC or using DIECs (or digital integrated electronics circuits), is well-known for its cost-effectiveness and long-term stability of its output. The main principle of a XTAL oscillator is based on the piezoelectric effect, and uses an Xtal resonator, which is a capacitor-inductor-capacitor (C-L-C) network of components. The central element of the Xtal resonator is an Xtal of quartz, with two layers of metal electrodes attached to its opposite faces.This crystalline quartz stimulates an electrical signal at its natural resonance frequency when a voltage is applied over it, as in the technological basis of the 520M25HT40M0000 oscillator. This electrical signal is where the oscillator derives its tone or amplitude, and the frequency can be finely tuned just by applying a voltage over the crystal resonator. Eventually, the Xtal oscillator can be complemented by other components, such as an amplifier and other voltage regulating devices, to increase the amplitude of the electrical signal of the Xtal oscillator and output a more clear and stronger signal. In summary, the 520M25HT40M0000 oscillator is an ideal choice for those applications requiring a reliable high stable frequency source, such as those found in short-haul and mid-speed serial communications circuits. Its main technology revolves around the piezoelectric effect, which uses the crystalline quartz as a central element. This quartz stimulates an electrical signal at its natural resonance frequency when a voltage is applied over it and makes possible a precise and controllable frequency output with built-in frequency adjustment elements. Eventually, a amplifier can be added for better control of the amplitude and output strength of the oscillator.

The specific data is subject to PDF, and the above content is for reference