5435941

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Size:	M3
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Gray
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	BCP
Current - UL:	15A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	24
Number of Positions:	24
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks – Headers, Plugs and SocketsTerminal blocks are typically used in the electronics industry to connect two different powers to each other. They are also used in the production of electronic products, as they provide an easy way to join and electrically connect one device to another. For example, if an electronic circuit board is to be connected to another device, it can be done using a terminal block.Terminal Blocks are most commonly used in the design and building of industrial systems. For example, buildings or applications such as HVAC systems, energy generation and distribution, telecommunications and data storage all use terminal blocks for the electrical connections between devices. The two most common terminal types used in the electronics industry are header blocks and plugs and sockets.Header Blocks – Header blocks are used when two wires need to be connected. These blocks are a device with two or more terminals, which comes with an insulated body and two screw holes. It is designed so that when two wires are inserted into the terminals, they make a connection. These connections are also known as "hot" connections as the terminals can get very hot when connected, so it is important to ensure that the cables being used can handle the heat.Plugs and Sockets – Plugs and sockets are used when one wire needs to be connected to another and is fitted with a socket. These devices are similar to header blocks, but the connections are usually protected by plastic or rubber to prevent them from short-circuiting. Plugs are used as a power connector to connect two circuits or an on/off switch. Sockets are used to connect two power sources or two pieces of equipment, such as a computer and a printer.When selecting a terminal block for a particular project, it is important to consider the following factors:• Current Capacity: The current-carrying capacity of the block should exceed the current-carrying capacity of the two components.• Operating Temperature: The operating temperature of the block should be low enough to ensure that it is safe to use.• Safety: The block should be designed to meet safety standards and should include approved safety features, such as overload protection.• Connectors: The type of connector used should depend on the application requirements and the components used.Overall, terminal blocks are a versatile and robust component for both engineers and hobbyists. They provide a secure and reliable connection between different components, making them an essential part of any electronic design. With the right terminal block, a wide range of applications can be undertaken, from connecting two wires to connecting a device to a power source.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description