5535090-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DIN 41612 connectors, also known as backplane connectors, are one of the most commonly used types of connectors in the data transmission industry. This type of connector is designed to enable parallel data transmission between devices that are housed in the same backplane or enclosure. They are extensively used in data transfer applications, such as Ethernet, Fibre Channel, fibre optics, SATA, etc. In addition, DIN 41612 connectors are also suitable for use in industrial and medical environments.

The DIN 41612 connectors series includes five types of connector with different contact counts and pin arrangements. These connectors are designed to provide secure, high-speed, serial data transmission. The five types of backplane connectors are: 17-row, 25-row, 37-row, 50-row, and 65-row connectors. The 17-row connectors have a contact count of 5 and the 25-row and 37-row connectors have a contact count of 7. The 50-row connectors have a contact count of 10 and the 65-row connectors have a contact count of 13. Each of these connectors is designed to meet the requirements of 100 ohms differential impedance and 20mV single-ended compliance.

The DIN 41612 connectors feature very small contact areas and are mechanically robust. These connectors are designed to provide high-density, reliable parallel data transmissions and are very suitable for gigabit data transfer applications. They use a central pin to align the mating connector and provide contact protection against arcing. In addition, the contacts of the connectors are designed in a way that ensures that a good mating connection is made between the mated connectors.

The DIN 41612-5 connectors are a commonly used type of backplane connector. They are designed for use in applications where high speed, high density, and reliable connection are desired. These connectors are designed to be solder mounted on a flat surface and have a contact count of 28. The contact areas on these connectors are very small and are designed to provide maximum contact reliability and signal integrity. The connector housing is designed for reliable mounting and the contacts provide a very secure connection.

The working principle of the DIN 41612-5 connectors is based on the creation of a reliable, low-impedance connection between mated plugs. The contacts of the connector pins are surrounded by a plastic insulator, and the contact pins are interlocked to ensure a secure connection. The central pin provides central alignment and also serves as a protection against arcing. The contact areas of the connector are designed to provide a good electrical connection between the mated connectors.

DIN 41612-5 connectors are extensively used in a wide range of applications, such as industrial and medical applications. These connectors are designed to provide a reliable, low-impedance connection at high speeds and are suitable for a number of different data transfer applications. In addition, the small contact area of these connectors ensures good signal integrity and contact reliability.

The specific data is subject to PDF, and the above content is for reference