55A6543-16-6CS1999

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single Conductor Cables, popularly referred to as Hook-Up Wire, are electrical wires or cables that are designed to carry a single electrical current or signal. In the 55A6543-16-6CS1999 family of single conductor cables, the "55A" section indicates the nominal insulation thickness; the "6543" section identifies the type of jacket material; the "16" section represents the size of the conductor; and the "6CS" section denotes the type of conductor material. This type of single conductor cable is most commonly used for connecting electrical components and for conducting signal transmission.

Single Conductor Cables are available in a variety of sizes and insulation types, depending on the particular application. For instance, in applications that require high voltage electricity, such as for large industrial machinery, 16 gauge or heavier cables are usually specified. On the other hand, for most small and medium-sized electrical appliances, 14 gauge or lighter cables are generally used. The type of insulation used for a particular cable also depends on the application. For low-voltage use, PVC and rubber-insulated cables are typically used, while higher-voltage applications require cables that use a more expensive type of insulation, like cross-linked polyethylene or FEP.

When selecting the appropriate single conductor cable for a particular project, it’s important to consider the current load as well as the type of environment where the cable will be used. In outdoor applications, cables should be chosen with a jacket material such as Teflon that is resistant to ultraviolet light and other debris. For indoor use, cables should be chosen with a jacket type that is adequate for the given environment. It’s also important to consider the overall cost of the cable, as some higher-end single conductor cables can be quite costly.

Once the appropriate single conductor cable has been chosen for an application, the working principle of the cable is straightforward. The single conductor cable carries a single electrical current, or signal, from one point to another. It also acts as insulation, protecting the current or signal from external interference. For cables with the same gauge insulation, thinner insulated cables typically offer better protection than thicker insulated cables, as they can absorb more energy. Additionally, it’s important to note that it’s not uncommon to see more than one single conductor cable used in a single application, as this allows for the current or signal to be transmitted more efficiently.

Single Conductor Cables are an essential component in many modern electrical projects, and the 55A6543-16-6CS1999 family of single conductor cables is an example of a proven and reliable cable for low or medium-voltage application. By selecting the right cable for a given application, as well as understanding the working principle of the cable, it’s possible to ensure the best possible performance from the system.

The specific data is subject to PDF, and the above content is for reference