592D105X0035B2T15H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are polarized capacitors with an anode made of tantalum and an electrolyte of organicmanganese and/or conductive polymer. Tantalum capacitors are widely used in applications from consumer electronics to military, aerospace and automotive applications due to their small size, good electrical characteristics, low ESR and extended temperature range. They are usually smaller than aluminum electrolytic capacitors, but they are much more expensive.

592D105X0035B2T15H is the type designation of a typical SMD tantalum capacitor. The “592D” designator in the part number references the case size, which is a 1210 sized case. The 105 markings indicate that the capacitor has an operating temperature range of -55 to +105 degrees Celsius. The remaining characters in the part number refer to the nominal capacitance, voltage rating and the termination type. The “X0035” means it’s a 3.5volt rated capacitor, the “B2” indicates the capacitance tolerance (±20%) and the “T15” shows that the capacitor is a surface mount device (SMD) with a 15% tolerance.

This SMD tantalum capacitor is suitable for a wide range of applications due to its small size and high voltage tolerance. It is commonly used in high power audio amplifiers and in various military and aerospace systems due to its ability to withstand high temperature extremes. It is also popular in automotive electronics, power supplies and can also be used in medical and communication equipment.

The working principle of the SMD tantalum capacitor is quite simple. It works on the same principle as an electrolytic capacitor, with an anode made of tantalum and an electrolyte of organic manganese or conductive polymer. The difference is that the tantalum capacitor uses a larger dielectric, which gives it higher stability and lower loss. When a voltage is applied across the terminals of the capacitor, electrons accumulate on the anode causing a buildup of electrical charge. This charge creates an electrical field between the anode and cathode, allowing electricity to flow through the capacitor.

The use of tantalum capacitors has been increasing in recent years due to their high voltage tolerance and good electrical characteristics. They are able to hold their capacitance better than other types of capacitors, making them ideal for use in high power audio amplifiers and other high voltage applications. They also offer good stability, low ESR and extended temperature range, making them suitable for many different applications. Their small size also allows them to be used in areas where space is limited.

In conclusion, the 592D105X0035B2T15H SMD tantalum capacitor is suitable for a wide range of applications due to its small size and high voltage tolerance. They can be used in high power audio amplifiers, military and aerospace systems, automotive electronics, power supplies and medical and communication equipment. Their small size and good electrical characteristics also make them suitable for use in areas where space is limited. The working principle of the SMD tantalum capacitor is based on the same principles as an electrolytic capacitor, with an anode made of tantalum and an electrolyte of organic manganese or conductive polymer.

The specific data is subject to PDF, and the above content is for reference