5KP36A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) diodes are components that are specifically designed to protect sensitive electrical and electronic circuits from overvoltage conditions, i.e., voltage that exceeds the ratings of the circuit components. While the term voltage suppressor may sound like the component is designed to reduce or suppress voltages, this is not the case. A TVS diode can actually respond to an overvoltage condition and rapidly limit or «clamp» the voltage to a specified safe level.

The 5KP36A TVS diode is one such type, designed to protect circuits against transients caused by lightning, electrostatic discharge (ESD), high-frequency line transients, load dumps, or other electrical electrical events. It can handle up to 36A currents and 5kW peak pulse power, and has a reverse breakdown voltage of 36V.

5KP36A protection diodes are available in several configurations, including surface mount and through-hole devices. They are designed to protect circuits from catastrophic failure that can come from a wide range of voltage surges, including those that can come from environmental ESD flows, lightning surges, high-frequency transients, or other voltage events. 5KP36A protection diodes are designed to provide protection against transient voltage surges in a wide range of applications, including automotive, industrial, consumer, and telecommunications.

The working principle of a 5KP36A TVS diode is based on the «Clamping Action» concept. This is where a device will temporarily reduce the maximum peak voltage of an overvoltage transient to a much lower level. In the case of the 5KP36A, when it is exposed to a voltage transient, the diode will try to maintain the voltage at a maximum of 36V. The diode will clamp the voltage down to 36V or below until the surge has passed, allowing the circuit to remain protected.

When using a 5KP36A TVS diode, it is important to take proper steps to ensure it is properly installed and connected. The diode should be connected in parallel with the circuit it is protecting, and the current rating for the diode should be selected according to the maximum allowable current of the circuit. Additionally, an equalizing resistor should be added to the circuit, as this helps to ensure that the voltage transients are spread equally across the circuit.

In conclusion, the 5KP36A TVS diode is an excellent component for protecting sensitive electrical and electronic circuits from overvoltage conditions. The diode is designed to clamp the voltage down to 36V or below until the surge has passed, allowing the circuit to remain protected. Proper installation and connection of the diode is essential for ensuring optimum performance, and an equalizing resistor should also be used to ensure that voltage transients are spread equally across the circuit.

The specific data is subject to PDF, and the above content is for reference