6EDL04N06PCX1SA1

Series:	EiceDriver™
Part Status:	Active
Driven Configuration:	Half-Bridge
Channel Type:	3-Phase
Number of Drivers:	6
Gate Type:	IGBT
Voltage - Supply:	13 V ~ 17.5 V
Logic Voltage - VIL, VIH:	1.1V, 1.7V
Current - Peak Output (Source, Sink):	--
Input Type:	Non-Inverting
High Side Voltage - Max (Bootstrap):	600V
Rise / Fall Time (Typ):	60ns, 26ns
Operating Temperature:	-40°C ~ 125°C (TJ)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 6EDL04N06PCX1SA1

The 6EDL04N06PCX1SA1 is a Bidirectional gate driver IC which belongs to PMIC (Power Management Integrated Circuit) family. It is designed to drive any type of load, from very small and low power to large and high power. It can switch voltages up to 20V and provide peak current up to 6A, with a safe-operating area up to 40A and switching frequency up to 500 kHz. The 6EDL04N06PCX1SA1 is designed to allow for efficient multilevel switching, reducing switching time and losses. It is an ideal solution for industrial, automotive and high efficiency applications, providing excellent performance and reliability.

Applications of 6EDL04N06PCX1SA1

The 6EDL04N06PCX1SA1 is a bidirectional gate driver which is suitable for use in controlling motor drivers, power inverters, switched mode power supplies and other circuits where a high speed, reliable and robust electrical switching is required. It is also suitable for use in lighting, consumer electronic, solar and other renewable energy applications, providing excellent performance and reliability.The 6EDL04N06PCX1SA1 can be used as an isolated gate driver in isolated systems, as well as a common ground gate driver in non-isolated systems. It is also suitable for use in both normal and high voltage applications, allowing for a switching frequency up to 500 kHz.

Working Principle of 6EDL04N06PCX1SA1

The 6EDL04N06PCX1SA1 gate driver IC uses a full bridge type structure. It consists of four transistors and two diodes connected in pairs, forming two pairs of transistors and two pairs of diodes, respectively. The two pairs of transistors handle the high and low side of the load. The two pairs of diodes provide bi-directional current flow across the load. It is driven with a low frequency oscillator. The 6EDL04N06PCX1SA1 gate driver IC has two inputs, the ‘On’ and ‘Off’ input lines. When the ‘On’ line voltage is greater than 1V, the first pair of transistors is turned on and the second pair of transistors is turned off. Similarly, when the ‘Off’ line voltage is greater than 1V, the second pair of transistors is turned on and the first pair of transistors is turned off. This allows for efficient multilevel switching, reducing switching time and losses.

Conclusion

The 6EDL04N06PCX1SA1 is a bidirectional gate driver IC which belongs to PMIC (Power Management Integrated Circuit) family. This IC is designed to drive any type of load, from very small and low power to large and high power. It can switch voltages up to 20V and provide peak current up to 6A, with a safe-operating area up to 40A and switching frequency up to 500 kHz. The 6EDL04N06PCX1SA1 is suitable for use in controlling motor drivers, power inverters, switched mode power supplies and other circuits where a high speed, reliable and robust electrical switching is required. It is also suitable for use in lighting, consumer electronic, solar and other renewable energy applications. It uses a full bridge type structure and is driven with a low frequency oscillator. The 6EDL04N

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description