709150001020006 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contacts

709150001020006 contacts have been used in a wide range of industrial and commercial applications for decades. The contacts are typically made from a spring/pilot/plunger style design, usually constructed from stainless steel or brass. Depending upon design, these contacts can be pressed together to form a mechanical contact or activated by the pressure of a spring loaded plunger. This allows an electrical connection to be made when the contacts are in contact.

Typical applications for these contacts include automotive, electric and control panel wiring, circuit protection in consumer electronics and industrial switches. They allow current to be transferred between two surfaces that are not in contact at all times. This makes them an extremely reliable connection point, as they are not affected by mechanical fatigue, friction, corrosion or contamination.

The main benefit of using 709150001020006 contacts is their reliability and ability to provide a fast and reliable connection in most electrical systems. In addition, they are relatively inexpensive and are available in a wide range of configuration and contact force ratings.

Spring Loaded and Pressure

709150001020006 spring-loaded contacts have been used in a multitude of applications, typically to actuate a connection or disconnection when actuated by a pressure or force. When actuated, the contact is forced open and the spring-loaded mechanism releases the contact to provide a reliable electrical connection. When the force or pressure is removed from the actuator, the contact closes, thereby disconnecting the electrical connection. Typically, this type of contact is used in control circuits, pneumatic and hydraulic circuits as well as in various energy systems.

The spring-loaded contacts are usually actuated by a spring or cone-like plunger. When the plunger is actuated, it pushes on the contact to separate it from the body. This allows a circuit to complete and will allow for a relatively quick response from the electrical system. The spring-loaded contacts typically provide a reliable and consistent actuation pressure and can be used in a variety of applications. For example, they can be used to initiate a circuit when it is opened or closed, they can be used to disconnect a circuit when it is overloaded or shut off, or they can be used to control the current flowing through a circuit by allowing the current to pass through a higher or lower resistance.

709150001020006 contacts are available in various force ratings and are typically actuated by spring-loaded or pressurized actuators. The contacts are typically available in stainless steel or brass material and they can provide reliable and consistent contact loading. Additionally, these contacts typically provide a relatively quick response time and are used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference