74AC169MTCX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AC169MTCX is a semi-custom 16-bit register/counter with a serial I/O port. It is a highly integrated device containing a clock, two 16-bit registers, two 16-bit dividers, and two 16-bit counters. The 74AC169MTCX supports multiple supply voltages and clock rates, enabling flexibility in the design of digital systems. The versatility of the 74AC169MTCX makes it an ideal solution for applications requiring complex logic operations.

The 74AC169MTCX is suited to a wide range of application fields, from test & measurement and scientific research to commercial systems. The device is used in frequency counting, digital signal measurement, and various control and timing applications. It is also used in data transfer and synchronization, RF communication, and pulse generation.

The 74AC169MTCX operates at different clock rates and can be configured to operate with one or two registers. The device has two 16-bit registers, two 16-bit dividers, and two 16-bit counters. Each of the 16-bit counter can be independently enabled or disabled, allowing the user to select which of these three operations will occur when the device is active.

The 74AC169MTCX has multiple input and output ports, providing flexibility in the design of digital systems. The device has four address input ports to select the appropriate register, divider, or counter. The four control input ports allow the device to be configured for rising-edge or falling-edge triggered operations and for single-bit or multiple-bit operations.

The 74AC169MTCX can be used to divide a clock rate into lower frequencies. For example, a 16-bit counter can be used to divide an input frequency of 100 MHz by 2^16, resulting in an output frequency of approximately 610 Hz. The device also provides two registers that can be used for data storage. The registers can store up to 16 bits of data at any given time.

The 74AC169MTCX has two enable input ports, which allow the user to enable or disable the device at any time. The device can be configured to either enable or disable operations, depending on the state of the enable input ports. In addition, the device can be used in conjunction with a comparator circuit, allowing the user to reset the contents of the registers when a predetermined condition is met.

The versatility of the 74AC169MTCX makes it an ideal device for use in a wide range of application fields. The device can be used to generate signals, measure signals, store data, divide frequencies, and much more. The ability to configure the device for rising-edge or falling-edge triggered operations and for single-bit or multiple-bit operations makes it a very flexible tool for digital system designers.

The specific data is subject to PDF, and the above content is for reference