74ACT163MTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74ACT163MTR is a synchronous 4-bit presettable binary counter. With up/down counting capability, Asynchronous master reset and a wide range of operating voltage the 74ACT163 is ideal for any TTL based system. It is a great choice for all those who need a counter that can easily be reset remotely and offers accurate counting up or down.

The 74ACT163 is a modified synchronous 4-bit presettable binary counter with multiplexed up/down count capability. It consists of four negative edge triggered flip-flops connected in a series chain with up/down logic. The up/down input can be multiplexed with two other logic signals, allowing the device to be used as either a 4-bit up/down counter or two independent 2-bit up/down counters.

The 74ACT163 offers all of the features of a standard 4-bit presettable binary counter, plus additional functionality. It has a wide range of operating voltage (3V to 15V) and can handle up to 500MHz clock frequency. The chip also has an asynchronous master reset input, which can be used to reset the entire counter chain at once. This makes the chip ideal for applications where a reliable, quick reset is required.

The up/down count operation of the 74ACT163 is similar to the classic up/down counter. The output of each stage is connected to the input of the next stage and the clock input is used to advance the counter. When the up/down input is a logic high, the output of the first stage is connected to the input of the last stage, allowing the data to shift through the counter in a circular fashion. When the up/down input is a logic low, the data is shifted in the opposite direction.

The 74ACT163 offers multiple applications. It can be used in digital frequency dividers, digital timers, and pulse rate multipliers. It has been used in microprocessor-based systems, in digital control systems, and in communications systems. In microprocessor-based systems it can be used as an instruction counter to keep track of the instruction execution steps, or as an interrupt counter to count the number of interrupts. In communications systems, it can be used as a pulse counter to monitor communications signals or as a tap counter to monitor the signal taps on line transmission systems.

The 74ACT163 can also be used in test and measurement systems. It can be used to count the number of pulses from a rotating object, to measure frequency, and to measure pulse width or period of signal waveforms. It can also be used as a buffer for signal conditioning, signal rang selection, and start/stop count control.

In conclusion, the 74ACT163 provides an ideal solution for those who need a quick, reliable counter with up/down counting capabilities in TTL based systems. It has a wide range of operating voltage, can handle up to 500MHz clock frequency, and features an asynchronous reset input. With its multiplexed up/down count capability, the 74ACT163 can be used in many different applications from digital frequency dividers to microprocessor-based systems and test and measurement systems.

The specific data is subject to PDF, and the above content is for reference