74ACT573MTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT573MTR is a 16-pin quad latch device which is used in applications requiring level-sensitive logic with extended clock setup times of up to five times. It utilizes an advanced complementary metal-oxide-semiconductor (CMOS) process that reduces power consumption and increases speed. The device has four separate latches with separate enable (LE) and reset (R) inputs as well as a separate output (Q) for each latch. It can be used to latch up, store, or hold digital information in order to control the flow of logic. This device is widely used in systems that require low-power, fast-accessing, level-sensitive logic and where a high degree of data throughput is necessary.The 74ACT573MTR is a high speed, ultra low-power logic device with 8-bit wide address. It utilizes a dielectrically-isolated output, allowing for faster response time and reduced power consumption. With an operating voltage of 3.3 V, the 74ACT573MTR operates at a maximum speed of up to 25 MHz, at a temperature range of -55°C to +125°C.The architecture of the 74ACT573MTR is based on a latch-based logic design. This type of design allows for the storage of information in one or more flip-flops. A flip-flop is a type of logic gate that stores one bit of data, which can be either “1” or “0”. The data is stored in a latch within the flip-flop and is clocked in by the edge of the input clock signal.One of the main advantages of the 74ACT573MTR is its direct drive capability, which enables the device to drive multiple capacitive loads without the need for an external buffer or driver. This direct drive capability also reduces power consumption as the device only needs to supply a minimal amount of current to drive the outputs.The 74ACT573MTR has 2 input pins - LE (Latch Enable) and R (Reset) - which are used to control the latching of data in the device. The LE pin is used to enable and reset data or set the device off. When LE is low, data is either stored or reset in the latch, depending on the logic level of the R pin. When LE is high, data is stored in the latch and is available for use. The R pin is used to reset the latch. When R is high, data is reset and the latch is cleared.The 74ACT573MTR also has 4 output pins - Q0, Q1, Q2, and Q3 - which allow for the output of the data stored in the latch. The Q pin is an open collector output that can be used to drive highly capacitive loads. It is also TTL compatible, allowing it to be used in a wide range of applications.In conclusion, the 74ACT573MTR is an advanced, high-performance logic device that is widely used in commercial, industrial and medical applications. It’s advanced latch design provides enhanced speed and efficiency, while its direct drive capability reduces power consumption. The device\'s wide input and output operations allow it to be used in a variety of applications, while its high speed and wide voltage are ideal for applications that require rapid data access and higher power.

The specific data is subject to PDF, and the above content is for reference