74ACT573SJX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT573SJX is a high-speed, low-power 5-volt-only bipolar latch which contains five latch circuits. It is part of the family of advanced low-power CMOS, commonly known as LSTTL (Low-Power Schottky TTL). LSTTL is faster, more reliable, and requires lower power than conventional TTL logic.

The 74ACT573SJX is a useful device in a variety of applications such as memory and data decoders and data multiplexers. It is typically used in designs where low-power, high-speed, and maximum compatibility are needed.

The basic function of the 74ACT573SJX is to store and then transfer information from one device to another. As a latch, the device is able to hold data until another signal tells it to update it, after which it will keep the data until the next time an input signal is given. The device is commonly used in applications such as data storage and memory, as well as in logic. It can also be used in digital design, computer engineering, logic, and telecommunications.

The primary advantage of the 74ACT573SJX is its ability to operate at a very low level of power. The device achieves this by integrating high-speed and low-power format components on the same chip. The low-power and high-speed performance of the 74ACT573SJX also makes it attractive for use in logic, as it can be used as a logic latch with very little power consumption.

The principal of operation of the 74ACT573SJX is based on the use of MOSFETs (Metal Oxide Semiconductor Field Effect Transistors) to control the flow of data. The inputs to the device are connected to the gates of MOSFETs. When the gates of the MOSFETs have no voltage applied to them, the gates remain open, and no current flows through them. When a voltage is applied to the gates of the MOSFETs, the gates close, and current passes through the gates.

The latch is operated by the use of two signals. A “set” signal is used to set the latch to its active state, which causes the output from the device to be high. The second signal is a “reset” signal, which is used to reset the latch, shutting off the output from the device. The reset signal is activated by a high pulse, while the set signal is activated by a low pulse. When both signals are set to low, the output from the device is low.

The 74ACT573SJX latch is highly reliable and provides a high speed clocking pulse, which makes it suitable for fast circuits. It is also suitable for high density power applications since the power consumption is low. It is also easy to use and provides a reliable latch circuit at a very competitive cost.

The 74ACT573SJX can be used in a variety of applications, such as memory storage, logic, computers, communications, and digital logic design. It is well suited for these applications because it requires a low level of power and provides a high speed clocking pulse. It is also reliable and cost effective.

The specific data is subject to PDF, and the above content is for reference