74ACTQ563PC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACTQ563PC is a type of logic gate latch developed by Texas Instruments, which is utilized in numerous applications that require frequent or alternating changes in control signals. This component is a part of a family of integrated circuits (ICs) known as the 74AQCT series, which offer low to medium power operation and requirement across a broad range of markets and industries including automotive, security, industrial, and consumer electronics.

The 74AQCT series, of which the ACTQ563PC is a part, group together latch ICs that feature a logic gate structure with output capacities. The latch circuits are equipped with several different logic gates that allow for levels of control for what is either delivered or accepted by the particular component. The most characteristic feature of the latch circuits is their ability to hold or latch a control signal from the input with little power drain on the circuit.

Specifically, the 74ACTQ563PC is a 4-bit latch set made of of an octal low-power Schottky from the TTL family. It is packaged in an industry-standard plastic Small Outline Integrated Circuit (SOIC) 20-pin dual in-line package (DIP) with dimensions of 37.75 mm x 10.3 mm. The operating temperature of the component falls in the range of 0° to 70° Celsius. The supply voltage requirement of the component is between 4.5 V to 5.25 V, with a maximum guaranteed power dissipation rate of 4.03 mW/mil.

The logic pins of the component are rated at maximum VCC of 3V and a minimum of 1.7V. The TTL-Resistive Load fan-in should be configured as true, while the TTL-Power Load fan-in should be contracted as complementary. The IC is also equipped with an open drain master reset input, a chip enable input and a logic enable output for its operation.

The latch has a wide range of application potential in both digital as well as analog circuits. It can be used to provide the necessary component on printed circuit boards with interactive systems, such as those found in CCTV, door and window locking systems, home alarm systems, security systems, automotive systems and so forth. The component is also widely used in portable devices such as PDAs, medical instruments and portable game consoles. The component is also commonly utilized in board-level driving of motors, solenoids, as well as stepper motors.

In terms of its operation principle, the 74ACTQ563PC functions by capturing the input data when the chip enable input pin is activated, while the output is enabled and the data is latched. The component will then drive a high voltage output once the input data is latched. The component contains a master reset input that can be triggered to reset the output data and force all outputs to a low logic level. The component can also be enabled or disabled by setting or resetting the logic enable output to a low logic level.

The component is widely used due to its low power requirements and the ease with which it can be integrated into digital and analog systems. The component has been seen to be at par in performance when compared with regular and more expensive alternatives. This is further supplemented by the long-term reliability, durability and cost-effectiveness of the component.

The specific data is subject to PDF, and the above content is for reference