74F193SJX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74F193SJX can be classified as a Logic - Counter, Divider device. It is a 16-bit synchronous binary up/down counter, which has four control inputs and one control output. The 74F193SJX device is used in various applications, such as frequency division and switching circuits.

The 74F193SJX device is a CMOS device with three selectable count modes: up/down, single up, or single down. The count mode selection is made available through the selection of the UP/DOWN and UP/DOWN/LOAD control inputs. The CLOCK input is a logic-level pulse that is used to clock the counter and theynchronize the operations of the device. Then the master reset input can be used to reset the output of the counter to its preset option.

The 74F193SJX is primarily used for frequency division. The device has a programmable count downup option that can be used for division of incoming clock signals. It can also be used in switching circuits as a divider counting circuit and as a timer in a clocking monolithic fabrication. There are several advantages of using this device in a Frequency Division application, such as its low power consumption, low jitter, and low noise margins.

The 74F193SJX can also be used in a variety of applications such as Modem PLLs, phase-locked loops, photoelectric detectors, stepper motor control and switching control circuits. In the application of phase-locked loops, the device is used to divide a component of a periodic signal so that it can be used as a reference signal to be compared with the incoming periodic signal. The output from the 74F193SJX can then be used to monitor the accuracy of the incoming signal.

The basic principle of operation for the 74F193SJX is a count up or count down operation. Upon each rising edge of the clock input, the counter will either increment or decrement its output. When the UP/DOWN input is at a logic high, the counter will count up. When the UP/DOWN input is at a logic low, the counter will count down. The output is reset to zero by applying a high logic level on the master reset input.

In summary, the 74F193SJX is a 16-bit CMOS synchronous binary up/down counter with four control input and one control output. It is primarily used for frequency division, phase-locked loops and other application areas. The device has low power consumption, low noise margin, and low jitter making its suitable for these applications.

The specific data is subject to PDF, and the above content is for reference