74LCX573MTC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LCX573MTC is a logic device that is commonly used in the field of latches. It is classified as a logic latch, and it is part of the CMOS logic family. This device is often used in applications where latch type logic is needed, such as in circuit board designs, low voltage power supplies, and gaming consoles. Depending on the specific application, the 74LCX573MTC can be used as an edge-triggered, level-sensitive, or dual-edge-sensitive latch.

The 74LCX573MTC can perform two different latching operations, depending on its configuration. It has an active-high pass-through latch and an active-low pass-through latch. The active-high latch is used to latch data when the output of a circuit is at a high voltage, while the active-low latch is used to latch data when the output of a circuit is at a low voltage. When the circuit’s output goes to the opposite voltage of its latch type, the latch will open and data will be passed through. This means that the data in that circuit will be held until the output of the circuit changes voltages again.

In order to use the 74LCX573MTC, there are a few pins that must be connected. The input pins include a data in pin, a select pin, an enable pin, and a clock pin. The data in pin is used to provide an input signal to the latch. The select pin is used to choose the active or nonactive state of the device. The enable pin is used to turn the device on and off. Finally, the clock pin is used to provide a clock signal to the latch, which will trigger its action.

The output pins include a data out pin and a Q out pin. The data out pin is used to receive the latched data that is held in the latch. The Q out pin is used to provide an active output signal once the latch has been triggered. The output of the 74LCX573MTC will either be active or nonactive, depending on the configuration of the inputs.

The 74LCX573MTC is a useful logic device that can be used in a variety of applications, such as power supplies, gaming consoles, and circuit board designs. It has two different latching operations and several input and output pins that must be connected in order to use it properly. This device is often used in applications where latch type logic is needed.

The specific data is subject to PDF, and the above content is for reference