76575-B00000040-01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors, transducers, and 76575-B00000040-01 are tools used to measure, control and monitor pressure. Pressure sensing devices transmit signals to indicate the pressure, make the correct calculations, and record the results. The 76575-B00000040−01 is a wireless pressure transducer designed for use in process-measurement applications. This paper provides an overview of the application field and working principle of the 76575-B00000040−01.

Applications of the 76575-B00000040-01

The 76575-B00000040−01 is a pressure transducer designed to measure and monitor process variables. It is used in a variety of industries, including manufacturing, pharmaceutical, automotive, HVAC, oil and gas, chemical, food/beverage, and water/wastewater. Due to its wireless capabilities, it is especially useful in remote or hazardous locations that are difficult to access.

The 76575-B00000040−01 is suited for applications that require the measurement of pressure, line pressure, differential pressure, or level. It is designed to monitor pumped liquid or natural gas in pipelines, tanks, vessels, and pressure vessels. Additionally, it can be used to measure air pressure, water pressure, gas pressure, oil pressure, and more.

Working Principle of the 76575-B00000040-01

The 76575-B00000040−01 is a three-wire, high accuracy, ultra-low power wireless pressure transducer. The transducer operates on an integrated, low-power radio frequency (RF) link for transmitting pressure data to a remote console or supervisory control and data acquisition (SCADA) system. The transducer is composed of a strain gage-based pressure sensing element, radio frequency (RF) module, signal conditioning electronics, and high-temperature polymeric housing.

The strain gage-based sensing element consists of a bonded strain gage, which is connected to a diaphragm. The diaphragm is sealed on four sides and acts as the primary sensing device, converting pressure changes into a displacement of the diaphragm. This displacement is converted into a resistance change, which is proportional to the applied pressure. The signal conditioning electronics amplify, linearize, and transmit the output of the strain gage to the RF module.

The radio frequency (RF) module transmits the signal to a receiver. The receiver is connected to a SCADA system or remote console. The receiver converts the signals received from the RF module into a digital format for processing and display. The SCADA system processes the data, calculates it, and sends the results to a remote display or control unit.

Conclusion

The 76575-B00000040-01 pressure transducer is a wireless device designed for use in process-measurement applications. It is composed of a strain gage-based sensing element, radio frequency (RF) module, signal conditioning electronics, and high-temperature polymeric housing. It is used in a variety of industries, including manufacturing, pharmaceutical, automotive, HVAC, oil and gas, chemical, food/beverage, and water/wastewater. The 76575-B00000040−01 can measure pressure, line pressure, differential pressure, or level. It is especially useful in remote or hazardous locations that are difficult to access due to its wireless capabilities.

The specific data is subject to PDF, and the above content is for reference