83263027

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap action, limit switches are electrical devices that monitor the physical condition of a wide range of operations and enable them to be controlled. In a typical setting, the switch is triggered by physical changes such as a shift in pressure, temperature, force or movement. When the physical condition of the operation triggers the switch, it sends a signal to an external device - such as a controller - that initiates the required action.A limit switch may be configured to limit the movement of an automated process in all directions or protect against excessive force, pressure or temperature. The equipment typically has two contacts, a normally open and a normally closed, that change depending on the physical condition of the operation. Typically, the switch will remain in the normally closed position. When the switch trips, it changes from a closed to an open position and the external device, such as a controller, is alerted to a change in the status or condition being monitored.The application field and working principle of the 83263027 limit switch is best illustrated with an example. Suppose a machine needs to move a certain amount of force in a certain direction to complete its task. This force is monitored by the 83263027 limit switch. If the machine is pushing too hard, exceeding the force limit set by the no-go limit switch, the switch will trip and the machine will stop moving.The 83263027 limit switch operates in four modes: normally open (NO), normally closed (NC), manual reset and automatic reset. The switch normally operates in a “NO” mode, meaning that when the limit is exceeded, the switch trips and the circuit opens. If the limit switch is manually reset, the circuit will close again when the limit is not exceeded. If it is automatic reset, the switch will reset as soon as the limit is not exceeded.

The specific data is subject to PDF, and the above content is for reference