84871120

Series:	C-Lynx
Part Status:	Active
Type:	Current Sensing AC/DC
Trip Status:	Energized High/Low
Trip Range:	2 ~ 500mA AC/DC
Delay Time:	0.1 Sec ~ 3 Sec
Voltage - Supply:	24 ~ 240VAC/DC
Output Type:	Relay
Circuit:	DPDT (2 Form C)
Contact Rating @ Voltage:	5A @ 250VAC
Mounting Type:	DIN Rail
Operating Temperature:	-20°C ~ 50°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: 84871120 is a current/voltage monitor and relay output device, designed to detect and monitor both instantaneous and average current/voltage values. It is used to quickly detect and respond to high/low thresholds and to control the application of a specific output, whether that output is mechanical or electrical. 84871120 provides reliable and accurate current/voltage monitoring, as well as configurable output action for a wide variety of applications.

Applicable Fields: 84871120 is commonly used to monitor and control the safety of electrical equipment. It can also be employed in power and alarm system applications, such as power failure detection and alarm activation. This device is also used to monitor the amount of electricity used, as well as to detect the presence of dangerous voltages. Other applications for 84871120 monitor include motor protection circuits, lighting control systems, and industrial process and control.

Working Principle: The 84871120 monitor works by detecting and monitoring both instantaneous and average current/voltage values. It is equipped with two threshold settings, which serve as the upper and lower limit values at which the output will be triggered. When the current/voltage reading of the monitored system reaches either the upper or lower threshold level, the 84871120 will activate a switch relay and provide an output signal. The 84871120 can also be configured to activate or deactivate the output signal based on the timer setting.

Configuration of the 84871120: The 84871120 monitor is highly configurable. An operator can select the operating voltage and output type for the device, as well as the different parameters of the threshold levels and timer settings. Additionally, the 84871120 can be programmed with different voltage/current levels that trigger an output.

Installation of the 84871120: The 84871120 is fairly easy to install, requiring only basic knowledge of wiring and connections. The 84871120 must first be connected to the power source for the system, and then the output must be connected to the monitored circuit. The 84871120 must then be manually calibrated for the specific voltage and current levels needed by the system.

Conclusion: The 84871120 monitor is a current/voltage monitoring and relay output device designed to detect and monitor both instantaneous and average current/voltage values. It is used to quickly detect and respond to high/low thresholds and to control the application of a specific output. 84871120 provides reliable and accurate current/voltage monitoring, as well as configurable output action for a wide variety of applications. The 84871120 is also easily configured and installed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description