860010372004

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in modern electronics owing to their relatively high capacitance for a given volume and their low cost. This type of capacitor is constructed using a metal plate and a substance called electrolyte. The electrolyte can be a liquid, such as ethylene glycol, or a solid, such as a ceramic material.

The metal plates act as the electrodes of the capacitor, which are usually made of aluminum. These electrodes are separated by a non-conductive membrane, which prevents electrons from flowing between the plates. In addition, the capacitor is insulated with a dielectric material such as paper, mica, or plastic.

One of the most important parameters that define an aluminum electrolytic capacitor is its capacitance. This parameter determines the amount of energy the capacitor can store, and is usually measured in picofarads (pF). The higher the capacitance, the more energy can be stored in the capacitor.

The 860010372004 aluminum electrolytic capacitor is a standard electrolytic capacitor that has a capacitance of 10µF (10,000pF). This is fairly high for an electrolytic capacitor, and is suitable for a wide range of applications. Its maximum rated voltage is 25VDC, meaning it can handle a maximum operating voltage of 25 volts.

The 860010372004 aluminum electrolytic capacitor is primarily used in AC circuits where a large amount of capacitance is required. The capacitor is usually connected across the supply line of the AC circuit, and acts as a filter to reduce any high frequency noise. The capacitor can also be used in DC circuits to provide a buffer for the voltage or to smooth out any voltage fluctuations.

The working principle behind the 860010372004 aluminum electrolytic capacitor is fairly simple. When a voltage is applied across its terminals, a large amount of charge builds up at its plates. This charge is stored in the capacitor, and can be discharged when the circuit requires it.

The amount of charge that can be stored depends on the capacitance of the capacitor. The 860010372004 capacitor is capable of storing up to 10µF (10,000pF) of charge, which is suitable for a wide range of applications.

In conclusion, the 860010372004 aluminum electrolytic capacitor is a standard electrolytic capacitor that has a capacitance of 10µF (10,000pF) and a maximum rated voltage of 25VDC. It is used in AC and DC circuits to provide a large amount of capacitance, and is also used to filter high frequency noise and provide a buffer for voltage fluctuations. The working principle behind the capacitor is fairly simple, and is based on the ability of the capacitor to store a large amount of charge.

The specific data is subject to PDF, and the above content is for reference