9001-100-1080

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks), are used in countless electronic applications such as audio, video, communication, and networking. These filters address either EMI (electromagnetic interference) or RFI (radio frequency interference), depending on the electrical characteristics and design required. The filter types used in these applications most often include various combinations of inductors, capacitors, and resistors to form LC (inductance/capacitance) and RC (resistance/capacitance) networks, with the primary purpose of filtering high-frequency energy.

The 9001-100-1080 application field and working principle is specifically designed to provide an effective solution to EMI and RFI problems. The 9001-100-1080 filter includes an LC card, with a three-bucket configuration, that operates in Three-Mode Operation (LCC, LC, RC). The filters are designed for Industrial Grade applications rated at -20°C to +85°C and is rated up to a maximum working voltage of 250V. The 9001-100-1080 is capable of withstanding at least 10 Frequency cycles in the range of 100-1000MHz.

The Three-Mode Operation of the 9001-100-1080 consists of three stages: an LCC stage, LC stage, and RC stage. The LCC stage uses a combination of inductors and capacitors in a bridge configuration while the LC stage functions to reduce high-frequency noise caused by high-speed currents. The RC stage is used to reduce current intensity. Each stage has its own characteristics and must be tuned accurately to provide the desired performance. The overall performance of the filter can be further improved if any additional components such as additional capacitors and resistors, or special absorbers are added.

In addition to Three-Mode Operation, the 9001-100-1080 also includes an EMI filter section which is used to suppress noise in the EMI frequency range up to 100MHz. The EMI filter is configured as a shunt-capacitor filter connected in parallel to the power bus. The filter includes one or more capacitors connected in series, with an additional shunt resistor that helps to absorb noise. A current limiting resistor may also be included to reduce the flow of DC current caused by the filter\'s shunting effect.

The performance of the 9001-100-1080 depends largely on the design and tuning of its components, as well as the impedance characteristics of the circuit it is connected to. To optimize its performance, all components must be tuned correctly and there must be proper shielding and grounding of equipment and circuit boards. The filter should also be tested in the environment it is expected to perform in, and the impedance characteristics of new components and circuits should be checked before installation. Proper maintenance is also essential for optimal performance, so periodic testing and cleaning is recommended.

The 9001-100-1080 is an effective EMI/RFI filter solution designed for Industrial Grade applications. Its Three-Mode Operation provides superior EMI and RFI protection, while its EMI filter section helps to absorb noise in the EMI frequency range up to 100MHz. The filter must be accurately tuned, and the proper maintenance and testing is required to ensure optimal performance.

The specific data is subject to PDF, and the above content is for reference