93LC56C-E/ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

93LC56C-E/ST is a type of memory device that belongs to the Econoram category – an organization made to classify memory devices. This type of memory IC is known for its affordability, high-speed operation, and reliability.

In terms of its applications, 93LC56C-E/ST can be used in a wide range of systems, including areas such as digital address systems, remote control systems, point of sale systems, automated control systems, automotive control systems, and industrial process control. It is specifically designed for low-power applications such as automotive, home, and portable products due to its extremely low power consumption, low-voltage operation, and small size.

The IC provides a maximum of 8 Kbits of electrically erasable programmable non-volatile memory (EEPROM) with both I/O and control options. It also supports read and write operations for both parameter and block locations. The maximum write cycle is 500,000 times and the data write time is 6 ms. The read time, on the other hand, is 0.3 ms. The data retention of the device is 10 years.

The operating voltage of the 93LC56C-E/ST ranges from 2.7 V to 5.5 V. Its pinout is made up of 8 pins, which include SDI (Serial Data Input), SCK (Serial Clock), SDO (Serial Data Output), SDA (Serial Data Acknowledge), and CE (Chip Enable). Other pins include PGM (Program Mode), RESET (Reset Pulse), and VCC (Power Supply).

The 93LC56C-E/ST works using a serial communication protocol which is made up of a set of parameters – SDI, SDO, and SCK. To access a memory cell, the device first needs to be selected. This is done by sending a “chip enable” signal to the CE pin. Then, the system starts to send the address of the required memory cell on the SDI pin. This address is then shifted into the internal address register.

Once the address has been transmitted to the device, the system can either read or write data. If a read operation is required, data is read from the memory cell and is sent to the SDO pin, while if a write operation is needed, data is written to the addressed memory cell using the SDI pin.

The 93LC56C-E/ST can also be operated in a block write mode by first sending the start and end addresses and then the data to be written. It can also be operated in the no-block write mode, where the system can write the data directly without first sending the start and end addresses.

To ensure reliable operations with 93LC56C-E/ST, it is important to take into consideration the minimum amounts of electrical parameters such as the clock frequency, addressing modes, and write speed. The system should also be designed to handle voltage spikes and noise.

The 93LC56C-E/ST memory device is an ideal solution for applications where a low-cost, high-speed, and reliable memory device is needed. It is suitable for most general-purpose applications due to its low-power consumption, low-voltage operation, and small size.

The specific data is subject to PDF, and the above content is for reference