93LC66C-E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 93LC66C-E/MS is a general purpose nonvolatile CMOS serial EEPROM, classified as part of the memory family. This device is a 64-bit EEPROM, organized as 8 bytes of 8 bits each, using a reliable three-wire interface provided by the Microwire Serial Bus protocol. It also features an optional hardware-based write protect function. The 93LC66C-E/MS is a one-time programmable device, meaning it can be written to and read from, but cannot be erased or rewritten after programming is complete.

The 93LC66C-E/MS is most widely used for long-term storage of device configuration, calibration, and security information. With a wide array of applications due to its low power consumption and maximum data retention. They are also resistant to vibration, shock, and extreme temperatures and feature low pin count, compatibility with existing memory technologies, and configurable I/O status registers. EEPROMs such as this offer the greatest advantage when data needs to be permanently stored forever, and is a great choice for embedded system design.

The 93LC66C-E/MS works by converting data into a 3-pin serial interface between the EEPROM and the host processor. This interface ensures data integrity and proper access time while allowing the user to read, write, or erase the data. The bus consists of 3 pins, namely CS (Chip Select), SCK (Serial Clock) and SI (Serial Input). In addition, the device contains a serial output pin SO (Serial Output) for data retrieval. The basic logic of the device works by sending data through the SI pin, which is then clocked in through the SCK pin and latched through the CS pin.

The 93LC66C-E/MS is an 8-bit device and has two write commands, one for writing an 8-bit data word, and another for writing the entire 8 bytes of the device. The device also has two read commands, one for reading a single 8-bit data word, and another for reading the entire 8 bytes of the device. In addition, the device has a write-protect status register to enable/disable the write-protection on the entire device with a single command. The device also contains an on-chip address counter, which is incremented automatically after each 8-bit data word is read or written.

The 93LC66C-E/MS is an ideal device to use when one needs reliable, nonvolatile storage of data in any embedded system. Its serial interface allows for easy integration into most system designs without requiring additional software development. Furthermore, thanks to its ability to write protect data, it can also be used in systems where data integrity is essential. The 93LC66C-E/MS is thus a great choice for most system memory needs.

The specific data is subject to PDF, and the above content is for reference