ACNV2601-300E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output are mainly used to provide electrical isolation between two systems, and the ACNV2601-300E is a kind of ACNO series optoisolator designed to offer maximum noise immunity, high operational speed and improved reliability. It has the output transistor in open collector configuration.

Applications

The ACNV2601-300E can be used as a driver in encoding application. It can also be used to isolate low voltage level signals from higher voltage levels. This device is particularly useful in applications such as medical equipment, data communication networks and industrial equipment. It can also be used as an isolator in industrial process control applications. It can also be used in safety control systems, where electrical isolation is required.

Principle of Operation

The optoisolator works by using an LED as the light source which produces the light according to the input voltage. On the output side, the device has an integrated photocoupler and transistor which detects the light. When the light is detected, the output transistor turns on, thus allowing the output current to flow. The output current is proportional to the intensity of the light from the LED. This means that the current is regulated by the input voltage, which is why it is able to provide electrical isolation between the input and output sides.

The ACNV2601-300E also provides a high level of noise immunity. The device is designed to absorb a wide range of noise frequencies, thus preventing the signal from being corrupted. This ensures that the signal is transmitted without any errors.

Features

The ACNV2601-300E is a 4-pin SOP package optoisolator that has a wide operating temperature range of -55℃ to +125℃. Its compact size saves board space and allows for easy installation. It has a very low internal power consumption of only 200μA at 4.5V DC. It features a low propagation delay time of 2μs, which allows for faster data transmission. The device also has an integrated current limit protection and an output short-circuit protection. It has a high insulation voltage rating of 1000V AC and a wide response frequency range from 0.02MHz to 80MHz.

Conclusion

The ACNV2601-300E is a 4-pin SOP optoisolator designed to offer maximum noise immunity, high operational speed and improved reliability. It has a wide operating temperature range, low power consumption, fast response speed and a high insulation voltage rating. This device is mainly used for providing electrical isolation between two systems and is well-suited for applications such as medical equipment, data communication networks and industrial equipment.

The specific data is subject to PDF, and the above content is for reference