Allicdata Part #: | ACNV4506-500E-ND |
Manufacturer Part#: |
ACNV4506-500E |
Price: | $ 1.41 |
Product Category: | Isolators |
Manufacturer: | Broadcom Limited |
Short Description: | OPTOISO 7.5KV OPEN COLL 10DIP GW |
More Detail: | Logic Output Optoisolator Open Collector, Schottk... |
DataSheet: | ACNV4506-500E Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 1.27716 |
Data Rate: | -- |
Supplier Device Package: | 10-DIP Gull Wing |
Package / Case: | 10-SMD, Gull Wing |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 105°C |
Voltage - Supply: | 4.5 V ~ 30 V |
Current - DC Forward (If) (Max): | 25mA |
Voltage - Forward (Vf) (Typ): | 1.5V |
Rise / Fall Time (Typ): | -- |
Propagation Delay tpLH / tpHL (Max): | 550ns, 400ns |
Series: | -- |
Current - Output / Channel: | 15mA |
Output Type: | Open Collector, Schottky Clamped |
Input Type: | DC |
Common Mode Transient Immunity (Min): | 30kV/µs |
Voltage - Isolation: | 7500Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators, also commonly referred to as optocouplers, are electrical components that are designed to transfer electrical signals across two electrically isolated circuits. An optoisolator acts as an optical bridge between the two circuits, passing electrical signals through an optical path without direct electrical connection, greatly minimizing noise interference. The ACNV4506-500E is a logic output optoisolator with a wide range of applications and a variety of purposes.
The ACNV4506-500E has an on-state voltage of 5V-35V and an off-state current maximum of 100uA. The optoisolator is designed to provide power isolation for logic-level signals in a power sensitive environment. It can be used in a variety of applications, including motor controllers, robotic controllers, medical devices, and data acquisition systems.
In motor control systems, the ACNV4506-500E can be used as part of the power control system, isolating the power section from the logic section in order to reduce cross talk and possible interference. In robotic controllers, the optoisolator can be used to eliminate noise interference that may hinder the proper functioning of the controller. In medical systems, the optoisolator can be used to ensure that the device is functioning correctly and not experiencing any electrical interference. In data acquisition systems, the optoisolator can be used to isolate the data-collection system from the rest of the system, preventing noise from interfering with accurate data collection.
The ACNV4506-500E is designed with a diode-transistor structure. The input to the optoisolator is a low-level input, and the output is a logic output. The optoisolator has a light-emitting diode (LED) as the input side, which can be used to send a signal across the optical isolator. When the input voltage of the diode is increased, the LED will light up and emit a light signal that is received by a photodetector. The photodetector then converts the light signal into an electrical signal and transmits it to the output transistor.
The output transistor then amplifies the signal and sends it to the output side of the optoisolator. The output can be controlled by adjusting the gain of the transistor, which can be changed by varying the voltage or current applied to the base of the transistor. The ACNV4506-500E is designed with a high common mode rejection ratio (CMRR), allowing it to effectively reduce power line interference and ground loops. The optoisolator also has a wide operating temperature range, making it suitable for a variety of applications.
The ACNV4506-500E is an easy-to-use, cost-effective optoisolator that is well-suited for use in a variety of applications. Its wide range of features, such as its high CMRR and wide operating temperature range, make it an ideal device for power sensitive logic-level signal applications. Furthermore, its convenient diode-transistor structure provides a simple way to isolate power sections from logic sections while ensuring that the device remains noise-free.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ACNV2601-000E | Broadcom Lim... | 1.6 $ | 1000 | OPTOISO 7.5KV OPEN COLL 1... |
ACNV260E-500E | Broadcom Lim... | 3.63 $ | 1000 | OPTOISO 5KV OPEN COLL 10D... |
ACNV260E-300E | Broadcom Lim... | 3.83 $ | 1000 | OPTOISO 5KV OPEN COLL 10D... |
ACNV3130-300E | Broadcom Lim... | 2.23 $ | 1000 | OPTOISO 7.5KV GATE DRVR 1... |
ACNV3130-500E | Broadcom Lim... | 2.23 $ | 1000 | OPTOISO 7.5KV GATE DRVR 1... |
ACNV4506-500E | Broadcom Lim... | 1.41 $ | 1000 | OPTOISO 7.5KV OPEN COLL 1... |
ACNV2601-500E | Broadcom Lim... | -- | 8000 | OPTOISO 7.5KV OPEN COLL 1... |
ACNV3130-000E | Broadcom Lim... | 4.99 $ | 850 | OPTOISO 7.5KV 1CH GATE DV... |
ACNV4506-300E | Broadcom Lim... | 3.31 $ | 622 | OPTOISO 7.5KV OPEN COLL 1... |
ACNV260E-000E | Broadcom Lim... | 7.34 $ | 966 | OPTOISO 5KV OPEN COLLECTO... |
ACNV2601-300E | Broadcom Lim... | 3.66 $ | 739 | OPTOISO 7.5KV OPEN COLL 1... |
ACNV4506-000E | Broadcom Lim... | 1.45 $ | 1000 | OPTOISO 7.5KV OPEN COLL 1... |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...