ACNV2601-500E Isolators

Data Rate:	10MBd
Supplier Device Package:	10-DIP Gull Wing
Package / Case:	10-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 105°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.64V
Rise / Fall Time (Typ):	25ns, 10ns
Propagation Delay tpLH / tpHL (Max):	80ns, 80ns
Series:	--
Current - Output / Channel:	50mA
Output Type:	Open Collector, Schottky Clamped
Input Type:	DC
Common Mode Transient Immunity (Min):	20kV/µs
Voltage - Isolation:	7500Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output

Optoisolators are devices used in electronic circuits containing both electrical and optical components that isolate one part of a circuit from another. Optoisolators are commonly used to transfer signals across, signals which when travelled through a wire, could be seen or measured by a test meter. Optoisolators are widely used in automation, communication, consumer electronics, medical, military and spaceflight.The ACNV2601-500E optoisolator is classified as a logic output optoisolator. It has one side (the input side) which is electrically connected to the circuit, and the other side (the output side) which emits visible light when electricity is directed through it. When the input side is given electricity, it produces an output of light that can be picked up by a photosensitive device, such as a photocell. When this output of light is received, a signal is sent from the output side to a device such as a processor, a LED, a relay, or other electrical components.The ACNV2601-500E is a versatile optoisolator, as it is suitable for a variety of purposes. It can be used as an interrupter, isolator, converter, and driver. The ACNV2601-500E is also available in a surface mount package which allows it to be embedded into tight spaces. The optoisolator is also able to accept input voltages from 5V to 24V, depending on the application.Regarding the principle of its operation, the ACNV2601-500E optoisolator consists of an LED, a light-sensitive photodetector, and a voltage regulator. When a voltage is applied to the LED, it emits light. This light activates the photodetector, which in turn produces an electrical current. This electrical current is then regulated by the voltage regulator and directed to the desired device or component.The ACNV2601-500E optoisolator can be used in many applications due to its ability to provide highly efficient and reliable signal transfer. It can be used as a data isolation device to isolate sensitive circuits from AC power lines, or control the input/output of a high-voltage circuit. It can also be used as a reset trigger to ensure that a processor runs properly, or as an audiovisual device to transfer a signal from a digital to an analog device. Other applications for the ACNV2601-500E include, but are not limited to, power supply monitoring, motor control, and optical data transfer.Overall, the ACNV2601-500E is a valuable optoisolator that has many advantages over other similar devices. This device has a long life span and is able to provide highly efficient and reliable signal transfer. Its versatile design also allows the ACNV2601-500E to be used in a wide range of applications. With its ability to accept input voltages from 5V to 24V, the ACNV2601-500E is an ideal optoisolator for many different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description