ACNW261L-000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output are small-sized optocouplers that are widely used in high speed and low-voltage applications. The ACNW261L-000E is a very popular optocoupler available to industrial automation, making full use of its compact design while being very powerful and reliable in the field.

The ACNW261L-000E optoisolator is typically used to isolate the input and output signals of two electrical circuits. By employing optical signals to communicate between the two circuits, the isolation is able to significantly shield from electromagnetic interference, electric noise, and voltage transients. Additionally, the device also functions as an impedance transformer, allowing for proper signal transmission over a longer distance.

The device itself is a 500MHz logic output optoisolator, with the input being a 20MHz logic signal, and the output then being connected to the circuit with a load of 50pF. It has a total output current of 10mA, and a working voltage range of 2.4V to 5.5V. The optoisolator is also equipped with a number of features, including automatic waveform detection, pulse width modulation, low-voltage hysteresis, and thermal protection.

As far as the working principle of the ACNW261L-000E optoisolator is concerned, it is based on the operation of the four phototransistors that are integrated into the device. Incoming electrical signals are converted into light energy via the phototransistors, and this light energy is then sent across an optically-insulated gap to light up the photodiode on the other side. The photodiode then converts the light energy back into electrical signals before it is sent out to the circuit. In the process, the signal is completely separated from the original electrical source, which provides complete electrical isolation for both the input and output connections.

The ACNW261L-000E also employs smart drive technology, which helps to reduce the number of printed circuit board connections required for transmission. This also helps to reduce the risk of any potential electrical faults that may occur, as a result of improperly soldered connections. Additionally, this optoisolator is also compliant with the latest international safety standards, including the EN61326-1 and ISEN61204-4 standards.

In conclusion, the ACNW261L-000E is an ideal choice for high-speed, low-voltage applications, thanks to its powerful isolation capabilities, impressive transmission times, and the smart drive technology it employs. With its total output current of 10mA, working voltage range of 2.4V to 5.5V, and its ability to reduce the number of required printed circuit board connections, the ACNW261L-000E is an excellent choice for industrial automation optoisolator solutions.

The specific data is subject to PDF, and the above content is for reference