Allicdata Part #: | 516-2612-ND |
Manufacturer Part#: |
ACNW3130-000E |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Broadcom Limited |
Short Description: | OPTOISO 5KV 1CH GATE DRIVER 8DIP |
More Detail: | 2.5A Gate Driver Optical Coupling 5000Vrms 1 Chann... |
DataSheet: | ACNW3130-000E Datasheet/PDF |
Quantity: | 586 |
Current - Output High, Low: | 2A, 2A |
Approvals: | CSA, IEC/EN/DIN, UR |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 100°C |
Voltage - Supply: | 15 V ~ 30 V |
Current - DC Forward (If) (Max): | 25mA |
Voltage - Forward (Vf) (Typ): | 1.6V |
Current - Peak Output: | 2.5A |
Series: | -- |
Rise / Fall Time (Typ): | 100ns, 100ns |
Pulse Width Distortion (Max): | 300ns |
Propagation Delay tpLH / tpHL (Max): | 500ns, 500ns |
Common Mode Transient Immunity (Min): | 40kV/µs |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Technology: | Optical Coupling |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ACNW3130-000E is an isolation driver component designed to provide electrical isolation between two circuits with very low pass-through voltage or current to either circuit. This allows the two circuits to work together without compromising the safety of either circuit. This component is ideal for isolating communications, motor controls, robotic controls, and other applications where electrical isolation is needed.
The ACNW3130-000E works by passing the pulse power from one circuit to another without causing any interference. This is achieved by the use of optical technology, which utilizes a silicon-based neural network to accurately measure and isolate pulses of power. As the pulses pass through the device, they are broken down and independently regulated to ensure that each pulse meets a specific safety standard. The power is then reduced to a low-voltage level and converted back to a high-voltage level when the pulse passes through to the second circuit, thus providing the desired electrical isolation.
The ACNW3130-000E isolator is specifically designed for use in harsh environments where high levels of voltage fluctuation, radio frequency interference (RFI), or wide temperature changes could damage sensitive electronic components. The isolator is made from a dielectric material that is highly resistant to thermal, mechanical, and electrical shock, and is fully ISO 9001 certified. This ensures that it can withstand extreme conditions and still provide reliable operation.
The ACNW3130-000E provides an extremely efficient, secure, and reliable solution for isolating circuits in industrial, military, and medical applications. The isolator eliminates the need for complex cabling and greatly reduces installation time, while providing the highest levels of electrical isolation. Furthermore, it is designed to operate in temperatures ranging from –40°C to +85°C, and has a maximum operating voltage of 500 V, making it ideal for a variety of applications.
The ACNW3130-000E is classified as an Isolator Gate Driver, which is an isolated device that acts as an interface between the electrical and mechanical components. This device takes an input signal, such as a pulse power, and sends an output signal after it has been isolated and regulated to the desired level. By using this device, designers can ensure that electrical signals are not affected by or interfere with other electrical circuitry, resulting in improved performance, safety, and reliability.
The ACNW3130-000E is an ideal choice for applications requiring reliable electrical isolation and highly efficient operation in harsh environments. The device is made of high quality materials and is ISO 9001 certified for the highest levels of safety and reliability. Furthermore, it can easily withstand temperature changes and other extreme conditions, making it the ideal solution for a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ACNW3130-500E | Broadcom Lim... | -- | 1000 | OPTOISO 5KV GATE DRIVER 8... |
ACNW3410-500E | Broadcom Lim... | 1.44 $ | 1000 | OPTOISO 5KV GATE DRIVER 8... |
ACNW3130-300E | Broadcom Lim... | 1.49 $ | 1000 | OPTOISO 5KV GATE DRIVER 8... |
ACNW3410-300E | Broadcom Lim... | 1.49 $ | 1000 | OPTOISO 5KV GATE DRIVER 8... |
ACNW3430-300E | Broadcom Lim... | 1.77 $ | 1000 | OPTOISO 5KV GATE DRIVER 8... |
ACNW3430-500E | Broadcom Lim... | -- | 1000 | OPTOISO 5KV GATE DRIVER 8... |
ACNW261L-500E | Broadcom Lim... | 1.34 $ | 1000 | OPTOISO 5KV TRI-STATE 8SM... |
ACNW261L-300E | Broadcom Lim... | -- | 1000 | OPTOISO 5KV TRI-STATE 8SM... |
ACNW3190-300E | Broadcom Lim... | 4.03 $ | 1546 | OPTOISO 5KV 1CH GATE DRIV... |
ACNW3410-000E | Broadcom Lim... | 3.33 $ | 1554 | OPTOISO 5KV 1CH GATE DRIV... |
ACNW3130-000E | Broadcom Lim... | -- | 586 | OPTOISO 5KV 1CH GATE DRIV... |
ACNW3430-000E | Broadcom Lim... | 3.95 $ | 1162 | OPTOISO 5KV 1CH GATE DRIV... |
ACNW261L-000E | Broadcom Lim... | 3.12 $ | 1062 | OPTOISO 5KV TRI-STATE 8DI... |
ACNW3190-500E | Broadcom Lim... | -- | 1000 | OPTOISO 5KV 1CH GATE DRIV... |
ACNW3190-000E | Broadcom Lim... | -- | 1323 | OPTOISO 5KV 1CH GATE DRIV... |
DGTL ISO 2.5KV GATE DRVR 16SOIC4A Gate D...
OPTOISO 5KV 1CH GATE DRIVER 8SMD1.5A Gat...
OPTOISO 5KV 1CH GATE DRIVER 5SOP3A Gate ...
OPTOISO 5KV 1CH GATE DRIVER 8DIP3A Gate ...
OPTOISO 5KV 1CH GATE DRIVER 8DIP3A Gate ...
OPTOISO 5KV 1CH GATE DRIVER 8SMD3A Gate ...