ACTT10X-800EQ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are swivel components with two junctions and two dipoles created when the two junctions are combined. Triacs, a type of thyristor, is a three terminal, three-junction semiconductor device, which is essentially a rectifier voltage-controlled switch. The term Triac is derived from the words TRIode for A.C. It has the same operational characteristics as two back-to-back SCRs with their gates tied together. A Thyristor can be turned on only once and the current through it can be varied in small amounts by varying the applied voltage when it is gated. On the other hand, a Triac is continuously switchable, and it can be switched on or off even with small fluctuations of gate voltage.

The ACTT10X-800EQ is a powerful Triac with a wide current range. It is used in most industrial and commercial electrical applications, including direct control of AC mains current and applied in applications such as motor control, lighting, and speed control. Its rated current threshold is 800A, which allows it to control surges of high-current load. Its current-carrying capability is also improved by its low gate trigger current rating of 12mA.

The ACTT10X-800EQ has several features that make it particularly useful in these power control situations. It has a very low forward voltage drop when conducting, which helps minimize energy loss during switching operations, as well as a low thermal resistance. This makes it an excellent choice for controlling high-current loads, where reliable operation and high efficiency levels are essential.

The working principle of the ACTT10X-800EQ is the same as the other Triacs. Once the gate receives a trigger voltage, the Triac will go into a conducting state, while a reverse-biased potential is connected between main terminals 1 and 2. This condition will remain until the forward voltage between main terminals 1 and 2 is removed or is reduced below the on-state conduction voltage. Under this condition, the ACTT10X-800EQ can regulate the current with small variations of the gate voltage.

In addition to its high current rating, the ACTT10X-800EQ also provides improved thermal performance with its low thermal resistance. It also has an extended low-level gate capacitance to reduce turn-on delay time. The ACTT10X-800EQ also has a lower switching time than other Triacs, which helps it operate at higher efficiency levels. This Triac can also be used in applications that have large loads with low speed, low switching time, and minimal losses.

The ACTT10X-800EQ is a versatile and efficient alternative to traditional thyristors. With its wide current rating and low thermal resistance, it can operate reliably under a variety of conditions and applications. Its low gate trigger current rating also makes it well-suited to controlling high-current loads. Moreover, its extended low-level gate capacitance provides improved turn-on delay time. As a result, the ACTT10X-800EQ can be used in a variety of power control applications, including motor control, lighting, and speed control.

The specific data is subject to PDF, and the above content is for reference