ACTT4X-800C,127

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC or Thyristor is an electronic component used as a component in devices that control or convert electrical currents. It is a three-terminal device, with three leads which individually control the current passing through it. In other words, it is an electromechanical switch controlled by a current or a voltage. They are commonly used in power control circuits and applications where the control of voltage or current is required. The acronym TRIAC stands for “Three-Terminal Integrated-Amp Controller”.

The ACTT4X-800C,127 is a special type of thyristor which is known as a TRIAC, or a Transistor rectifier Integrated-Amp Controller. It is a 3-terminal device which is used as a switch in power control applications. The three terminals are known as “Main Gate”, “Anode” and “Cathode”. The Main Gate is used to control the flow of current through the anode and cathode, while the Anode and Cathode control the voltage and current, respectively. It is designed to switch high currents and has a maximum RMS current of 800A.

Application Fields

The ACTT4X-800C,127 is mainly used in power control applications, such as lighting control, motor control, heater control and switched mode power supplies. It can also be used in other applications, such as controlling transformers and controlling semiconductor devices. In addition, it can be used as a switch in other electronic circuits, such as overvoltage protection and overcurrent protection.

Working Principle

The ACTT4X-800C,127 Thyristor, or TRIAC, works by switching on and off current to the circuit it is connected to. When it is in the “on” state, current flows through the anode and the cathode of the Thyristor, and when it is in the “off” state, the current is blocked. The amount of current that flows through the Thyristor is controlled by a signal applied to the main gate. This signal can be a voltage, a current, or a pulse. Depending on the type of application, a logic (high and low) signal can also be applied. The amount of current that flows through the Thyristor is determined by the main gate signal.

The ACTT4X-800C,127 Thyristor is a three-phase thyristor, meaning it can be used in three-phase circuits. The advantage of using a three-phase thyristor is that it can provide better control of the voltage and current than a single-phase thyristor. The three-phase thyristor also has a faster response time and is less likely to be damaged by transients.

Conclusion

The ACTT4X-800C,127 is a type of Thyristor, or TRIAC, used in power control applications. It is a three-terminal device which controls the flow of current through the anode and cathode, and its main gate signal determines the amount of current that flows through the device. It is used in multiple applications, including lighting control, motor control, and transformer control, and its three-phase construction allows for better control of the voltage and current than a single-phase Thyristor.

The specific data is subject to PDF, and the above content is for reference