AD20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electrical, Specialty Fuses

The AD20 is a specialty fuse designed for a wide range of applications. It has been designed for use in electrical systems, where it can offer protection from high levels of current. The AD20 fuse is a single-phase circuit breaker which is designed to break the primary circuit when the flow exceeds a rated level of current. It is capable of breaking high-level currents quickly, thus offering protection against the potential damage that high current can cause.

AD20\'s Mechanism and Working Principle

The working principle of the AD20 is based on the thermal effects of current. It is designed to sense the presence of excessive current and respond accordingly. The fuse element is made of a thermal conductor, such as silver or copper, which will absorb the heat generated by the current. This heat will cause the fuse element to expand, eventually causing the circuit to break. This thermal fuse element is placed inside a metal shell, which helps contain the heat.

The metal shell houses the fuse element, as well as the operating mechanism, which consists of bi-metallic strips inside the fuse housing. These strips will bend and move when a certain level of current is detected. This motion will cause the operating lever, which is connected to the bi-metallic strips, to open the circuit. The amount of current required to cause the trip is dictated by the AD20\'s rating. Once the circuit has been opened, it may be regained by resetting the operating lever.

AD20\'s Applications

The AD20 is mainly used in electrical systems, such as in homes, businesses and industrial applications. It can be used to protect against over-currents due to short circuits, ground fault conditions, electrical arc-faults and power spikes. It can also be used as a line of defence against a power outage, by allowing it to disconnect the power source when necessary. Furthermore, it can be used to limit current to certain electrical appliances, such as air-conditioners, water heaters and motors, in order to protect them from higher-than-allowed levels of current.

Recommendations

When installing an AD20, there are certain considerations which need to be made. For example, the fuse must be selected with a rating that matches the maximum expected current flow in the circuit. Furthermore, the fuse must be connected to the correct terminals of the circuit. It is also important to note that the circuit must not be overloaded, as this could cause the fuse to fail and put the electrical system in danger.

Overall, the AD20 fuse is a reliable device which can protect electrical systems from potentially dangerous current levels. When properly installed, it can provide a layer of protection against current overloads, short circuits, power outages and other related incidents. It is thus an important safety device which should be taken into consideration when designing and installing any electrical system.

The specific data is subject to PDF, and the above content is for reference