AD5676RBRUZ-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AD5676RBRUZ-REEL7 is a high-performance 16-bit digital-to-analog converter (DAC) from Analog Devices. It offers superb accuracy and low drift, making it ideal for test equipment, instrumentation, plus many more applications dependent on precision performance. It features the highly efficient, low-power Serial Peripheral Interface (SPI) protocol and can output from 1.8 V up to 5.5 V, making it suitable for both high- and low-voltage projects in a variety of situations.

The AD5676RBRUZ-REEL7 is a versatile and programmable device, capable of operating as either a general-purpose DAC or as a precision D/A converter with on-chip programmability, allowing greater control for applications that demand more customizability. An internal voltage reference provides ±4 LSBs of accuracy between 0°C and 70°C, plus up to ±0.03%/V deviation from 5V supply. Further, the ADC is robust against high frequency noise due to excellent layout and circuitry.

The AD5676RBRUZ-REEL7 is capable of supplying 17mA of output current (±14mA in unipolar mode) and can support a wide range of applications, including those that require high speed operation. All pins are protected against transient overvoltage with protection diodes, providing strong isolation against such disturbances. Furthermore, it is well-suited to dynamic power downs or external power mode since both integrated 20kΩ VZDNF resistors and up to 3.3V’s of delay can be programmed with external pins.

The working principle of the AD5676RBRUZ-REEL7 is based on a conversion process known as delta-sigma modulation. The Data Acquisition is performed by a single ADC, which samples the input signal at a rate much higher than the resolution of the DAC allowing for relative high accuracy. Simultaneously, the ADC digitalizes the analog signal it receives from its input, converts it into a digital representation of 1s and 0s and sends it at a high rate of speed to the DAC. The DAC, in turn, converts the 1s and 0s into a corresponding analog signal, recreating the original input signal but at a higher resolution. By repeated use of the single ADC and multiple DACs, the conversion time and accuracy are increased while minimizing system power consumption.

The AD5676RBRUZ-REEL7 is especially suitable for applications where precision performance and signal processing benefits, such as test equipment, instrumentation, and biomedical signal conditioning, are important. With its robust power management capabilities and high-speed sampling, the DAC is ideal for applications such as precision data acquisition, signal processing and analysis, medical imaging, and sensor interfacing where accuracy and signal monitoring are key.

The AD5676RBRUZ-REEL7 is designed to meet a variety of requirements, including enhanced signal-to-noise ratio, wide dynamic range and low output voltage deviation from the ideal analog signal. It features a wide bandwidth, allowing for high-resolution digital-to-analog conversion at speeds of up to 20 MS/s, and its on-chip digital logic and internal reference provide output correction and stabilization. Additionally, the AD5676RBRUZ-REEL7 is compatible with 3.3V, 2.5V and 5V logic interfaces, making it ideal for use in a wide range of systems. With its excellent noise immunity, low power consumption, and reliable operation, the AD5676RBRUZ-REEL7 is an ideal choice for precision and accuracy in a variety of applications.

The specific data is subject to PDF, and the above content is for reference